|
[China]
Trade Verify
Address: Foor 2, 4th Buidling, A Zone, Xinhe Xinxing Industrial 3th Zone, Fuhai Avenue, Baoan, Guangdong, China.
Contact name:Catlin Zeng
Shenzhen Wofly Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Characteristics of Stainless steel instrument ball valve
Features of Gas service instrument ball valve
TFM1600
Modified PTFE. Excellent seat material for purity applications.
Very low residual material during operation.Lower deformation ratio
than PTFE, but higher pressure and temperature rating than PTFE.
Chemicalresistance equal to PTFE material.
PEEK
Excellent seat material for high pressure and high temperature
applications. Excellent chemical resistance.Can be used
continuously in hot water or steam without permanent loss in
physical properties. High strengthfor hostile environment and high
pressure.
Material of Construction of Instrument ball valve
| Item | Part Description | Qty. | Material |
| 1 | Handle | 1 | Nylon |
| 2 | Handle Set Screw | 1 | Chrome-Plated Steel |
| 3 | Stem | 1 | SS316/316L |
| 4 | Packing Bolt | 1 | SS316/316L |
| 5 | Gland Packing | 2 | TFM1600 |
| 6 | Stem O-ring | 1 | Fluoroelastomer |
| 7 | Panel Nut | 1 | Ss304 |
| 8 | Body | 1 | CF8M |
| 9 | Ball | 1 | SS316/316L |
| 10 | Seat | 2 | TFM1600 |
| 11 | Body O-ring | 2 | Fluoroelastomer |
| 12 | End Cap | 2 | SS316/316L |
Ordering Information of Stainless steel ball valve
| C- | 3 | BVL- | S6- | 02 | A- | SK | |
| CLASSIFICA TION | PRODUCT TYPE | VALVE TYPE | MATERIAL | SIZE(FRACTIONAL) | SIZE(METRIC) | CONNECTION TYPE | MAX.WORKING PRESSURE |
| C:VALVE | 3:3PC | BVL:CASTIG BALL VALVE | S6 :SS316 | 02:1/8 | 6:6mm | A:AFK TUBE END | 5K:50kg |
| 04:1/4 | 8:8mm | MR:MALE BSPT THREAD | |||||
| 06:3/8 | 10:10mm | FR:FEMALEBSPTTHREAD | |||||
| 08:1/2 | 12:12mm | MN:MALE NPT THREAD | |||||
| 012:3/4 | FN:FEMALE NPT THREAD | ||||||
| 14:14mm | |||||||
| 16:16mm | |||||||
| 18:18mm | |||||||
| 20:20mm | |||||||
| 22:22mm |
| Type | Conn./Size | Orifice | Dimensions(mm) | |||||||||
| Inlet/Outlet | Inlet/Outlet | A | B | C | D | E | F | PanelHole Size | Max PanelThickness | |||
| AFK TUBE END | Fractional | 1/8" | 5.0 | 0.19 | 63.8 | 31.9 | 35.0 | 10.0 | 55 | 34 | 14.0 | 6.0 |
| 1/4" | 5.0 | 0.19 | 67.6 | 33.8 | 35.0 | 10.0 | 55 | 34 | 14.0 | 6.0 | ||
| 3/8" | 7.0 | 0.27 | 73.4 | 36.7 | 40.0 | 12.0 | 75 | 45 | 15.6 | 7.0 | ||
| 1/2" | 9.2 | 0.36 | 80.2 | 42.1 | 44.0 | 14.0 | 75 | 45 | 19.0 | 9.0 | ||
| 3/4" | 12.0 | 0.47 | 87.7 | 43.9 | 46.7 | 17.2 | 75 | 45 | 19.0 | 8.5 | ||
| Metric | 6mm | 5.0 | 0.19 | 67.0 | 33.5 | 35.0 | 10.0 | 55 | 34 | 14.0 | 6.0 | |
| 8mm | 5.0 | 0.19 | 69.6 | 34.8 | 35.0 | 10.0 | 55 | 34 | 14.0 | 6.0 | ||
| 10mm | 7.0 | 0.27 | 73.8 | 36.9 | 40.0 | 12.0 | 75 | 45 | 15.6 | 7.0 | ||
| 12mm | 9.2 | 0.36 | 79.8 | 39.9 | 44.0 | 14.0 | 75 | 45 | 19.0 | 9.0 | ||
| 14mm | 9.2 | 0.36 | 86.2 | 43.1 | 44.0 | 14.0 | 75 | 45 | 19.0 | 9.0 | ||
| 15mm | 9.2 | 0.36 | 86.5 | 43.2 | 44.0 | 14.0 | 75 | 45 | 19.0 | 9.0 | ||
| 16mm | 9.2 | 0.36 | 86.8 | 43.4 | 44.0 | 14.0 | 75 | 45 | 19.0 | 9.0 | ||
| 18mm | 12.0 | 0.47 | 87.8 | 43.9 | 46.7 | 17.2 | 75 | 45 | 19.0 | 8.5 | ||
| 20mm | 12.0 | 0.47 | 85.0 | 42.5 | 46.7 | 17.2 | 75 | 45 | 19.0 | 8.5 | ||
| 22mm | 12.0 | 0.47 | 85.6 | 42.8 | 46.7 | 17.2 | 75 | 45 | 19.0 | 8.5 | ||
| MALE THREAD | Fractional | 1/8" | 5.0 | 0.19 | 52.0 | 26.0 | 35.0 | 10.0 | 55 | 34 | 14.0 | 6.0 |
| 1/4" | 5.0 | 0.19 | 58.0 | 29.0 | 35.0 | 10.0 | 55 | 34 | 14.0 | 6.0 | ||
| 3/8" | 7.0 | 0.27 | 62.0 | 31.0 | 40.0 | 12.0 | 75 | 45 | 15.6 | 7.0 | ||
| 1/2" | 9.2 | 0.36 | 74.4 | 37.2 | 44.0 | 14.0 | 75 | 45 | 19.0 | 9.0 | ||
| 3/4" | 12.0 | 0.47 | 81.0 | 40.5 | 46.7 | 17.2 | 75 | 45 | 19.0 | 8.5 | ||
| FEMALE THREAD | Fractional | 1/8” | 5.0 | 0.19 | 45.0 | 22.5 | 35.0 | 10.0 | 55 | 34 | 14.0 | 6.0 |
| 1/4” | 5.0 | 0.19 | 52.0 | 26.0 | 35.0 | 10.0 | 55 | 34 | 14.0 | 6.0 | ||
| 3/8" | 7.0 | 0.27 | 57.0 | 28.5 | 40.0 | 12.0 | 75 | 45 | 15.6 | 7.0 | ||
| 1/2" | 9.2 | 0.36 | 65.4 | 32.7 | 44.0 | 14.0 | 75 | 45 | 19.0 | 9.0 | ||
| 3/4" | 12.0 | 0.47 | 73.0 | 36.5 | 46.7 | 17.2 | 75 | 45 | 19.0 | 8.5 | ||
Completed Projects
Applicable Scenarios
FAQ
Q1. What is your terms of packing?
A1: Export standard.
Q2. What is your terms of payment?
A2: T/T ,PayPal, Western Union.
Q3. What is your terms of delivery?
A3: EXW.
Q4. How about your delivery time?
A4: Generally, it will take 5 to 7 days after receiving your full payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A5: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A6: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A7: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A8. We keep good quality and competitive price to ensure our customers benefit ;
A8. We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from.
