Counting Machine Motorized SMD Smart Counter For SMT
Technical features
Display: 6 digits high efficiency leds
Maximum counting speed: 220 pc/sec (1 piece per hole)
Accuracy: ±1 piece
Holes per component: divider from 1 to 99 (and multiplier 2,3,4 for
0402, 0201 and 01005 components)
Maximum tape height: 56mm
Maximum reel diameter: 400mm (standard configuration), 650mm (with
8301.150 support)
Display: blue LCD with led backlight 160x104 pixel, visible area
74x46mm
Adjustable speed control
Step by step mode (1 component at a time)
Empty pocket check (optional)
Barcode reader input
Serial connection for label printer or PC
Selection of the operator (10 operators can be memorized with 8
alphanumerical chars everyone)
Internal clock (1 week backup)
Datalogger that stores the last 500 counting data
Memory storage for subtotals
2 side handles for easy transport.
Motorized counter
for taped SMD component counting. This machine works in a simple
way by counting the holes on the tape.
It can operate in two different ways:
Totalizer: components are counted from a zero reference, tape feed
is motorized and the counter automatically stops at the tape end,
to prevent loss of the total.
Preset mode: the desired component number is keyed on the keyboard
and the counter automatically stops when it reaches the
corresponding component.
All functions are easy to operate by the help of interactive
messages on the graphic display.
In the count screen are always visible:
- Counting direction
- Pitch number (holes per component)
- Working mode (Totalizer, Preset or Rewind)
- Name of the operator
- Components counted
- Date & Time or the last barcode reading.
Features:
1. Automatic SMD parts counter, LCD Chinese display large screen
and intuitive, simple and convenient operation.
2. The parts counter can be preset number of parts, both manual and
automatic mode switch; convenient point, sends the materials
picking operation designed for SMD strip parts design.
3. The parts counter can be both positive and negative can be
counted accurately calculate the number of zero errors.
The parts counter can be equipped with barcode scanner and printer,
the Taiwan legislature as licensing, facilitate management
operations.
5. Parts Counter SMT plant can fully control the number of parts,
to avoid the backlog of inventory and working capital, small, easy
to carry.
6. The feed pulley diameter: SMD any material which pulley size all
suitable parts counter.
7. Strip interval: 2,4,8,12, ... .48,52,56mm cycle, the operation
button is displayed as PITCH / spacing in parts counter.
8. The material width: 8,12,16,24,32,44,56mm.
9. sends the material, multi-adjustable plate feeding speed, smooth
start and stop the tape to prevent damage.
10. The adjustable arms, the size of the material can be applied.
Scope:
SMD strip parts and can be applicable
Unlimited soft wheel diameter tape, can be applied
