Sperm counting Slide and makler counting chamber like Leja Cellvision Slide

Sperm counting Slide and makler counting chamber like Leja Cellvision Slide

[Glass Specification]76.2mm×25.4mm×1.0mm

[ Usage ]The sperm counting chambers are apply to the computer and microscope assisted tests, such as, clinical medical examinations, animal husbandries, life science researches, drug trials, toxicology experiments for different types sperm analysis.

Usage: Using the micro pipette or pipette, it can add moderate concentration sample solution to the application area of the slide, and then the slide can automatically suck the sample into the chamber after the sample touch the edge of the cover slip.

Storage Condition: Ventilated, Dry, Moistureproof, Dust Pollution.

Product Advantage:

1. The slides can use the optimized counting chamber forming the single–layer, independent sperm cell, without overlapping and stacking phenomena. 2.Sanwe counting chamber can automatically suck the sperm from the suction port and fill with the entire chamber. It can save your time and reduce the working intensity.

3.One time only, no need to wash for reuse. It can prevent cross pollution from repeated use.

4.Each counting slide can test four or more samples in the same time.

Annoucements:

1. Semen collecting samples should be combined with samples after dilution, so as not to affect observation and analysis because of sperm density.

2. Before testing, sperm samples are placed on 38 ℃ thermostatic temperature platform for 3 minutes, which can get more accurate test results;

3. For frozen or more viscous semen samples, it should gently tap the coverslip after sample adding to eliminate static electricity and the surface protein adhesion, spreading sperms and avoiding sperm aggregation to affect the observation and analysis;

4. The counting slides are disposable supplies. Don’t reuse it and then it can protect the test results from the contamination.

CASA sperm counting slides are designed for the computer assisted sperm analysis to meet the requirements of CASA and OIE international standards.

Sperm counting Slide and makler counting chamber like Leja Cellvision Slide

Sperm Counting Slide Performance:

1. Clear sperm imaging, accurate and reliable test results: According to the sizes of different sperm species, the slides can use the optimized counting chamber forming the single - layer, independent sperm cell, without overlapping and stacking phenomena. And then sperms will form a clear image on the same focal plane without affecting the freedom movement of sperm in the horiziontal direction.
2. Established the standardized test of sperm to improve work efficiency: Using the optimized exhausting design, the counting chamber can automatically suck the sperm from the suction port and filled the entire chamber. It can save your time and reduce the working intensity.
3. Large amount of detection but low cost: each sperm counting slide is designed with 2 to 8 seperate testing chambers. Each counting slide may simultaneously test 2 to 8 specimens which can help you save your money. Ordinarily, four tests on one slide.
4. One time only, no need to wash for reuse. It can prevent cross pollution from repeated use.
5. Fast heating up to the set temperature to protect the motility and vitality of spermwith high detection efficiency and more accurate results.
6. It designed for the computer assisted sperm analysis to meet the requirements of CASA and OIE international standards.
7. Applications: It suitable for the clinical medical examinations, animal husbandries, life science researches, drug trials, toxicology experiments and many analysis of different types sperm.
Detailed Images

Instructions
1. The body fluid placement table is located at Φ8mm on the base plate. After using medical alcohol to clean and disinfect, you can use it.
2. Drop the liquid to be tested on the circular carrier and close the ring cover. Place the microscope platform to observe the count.
3. In the microscope eyepiece system access digital video camera and computer connection, you can use the analysis software for counting or morphology analysis.

Technical Parameters:
1. Dimensions:74 * 36 *7mm (plate with the total thickness).

2. The gap between the carrier platform (Φ8mm) and the cover plate is 10μ (0.01mm), accuracy error, ±1.5μ at a constant temperature of 37°C.

3. Grid size: 0.1 x 0.1 = 0.01 mm per cell.

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 3 to 7 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q6: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.



Q7. What is your sample policy?
A: We can supply the sample if we have ready parts in stock including shipping cost.

Product Parameters

Comparison Chart