Active Member
|
[China]
Address: Shenzhen, China
Contact name:Chris Guan
Shenzhen New Concept Optoelectronics Technology Co., Ltd |
|
|
Parameters:
Model | MS-PL18323 | ||
Input Voltage | AC90-264V 50/60Hz | ||
Dimension | L600*W600*T13mm | ||
Lighting Source | 288pcs SMD3014(Epistar/Osram) | ||
Power Consumption | 32W | ||
Color Temperature | WW(2800~3300K) | NW(4000~4500K) | CW(6000~6500K) |
Luminosity | ≥2400lm | ≥2520lm | ≥2700lm |
CRI(Ra) | >70 | ||
Beam Angle | 180° | ||
Work Temperature | -25℃～+45℃ | ||
Material | Alu+PMMA | ||
GW | 6.8kg | ||
NW | 6kg | ||
Cap ends | / | ||
Lifespan (LED) | ≥50,000hrs (70% Lumen Maintenance) | ||
IP Rating | IP50 | ||
Lumen Attenuation | <5% @ 5,000hrs | ||
Packing Dimension | L650*W650*H50mm | ||
| The LED Panel Light Advantage: Extremely High Efficiency :The Pollux series LED Panel Lights not only have high luminous efficiency but also a heat protection system. They have high-efficiency, constant current drive systems as well as protection from unstable voltages. |
| Long Lifespan :The average lifespan of traditional incandescent lamps is only 3000hrs, the CFL is 5000hrs. The Pollux series LED Panel Lights lifespan is vastly superior and can reach more than 30,000hrs. |
| Healthy Light :No thermal radiation or UV/IR rays are emitted from Pollux series LED Panel Lights. This is not the case for traditional incandescent lamps or CFLs. |
| Environment Friendly :Simao's LED Panel Lights are made with non-toxic materials, which means they can be recycled to minimize pollution. |
| High Optical Efficiency : Pollux series LED Panel Lights are six times more energy efficient compared to traditional fluorescent lamps. |
| Low Power Consumption :Consuming only 40W of power while providing 3400lm of light, the Pollux series LED light panels are bright, energy-efficient and can be used in a variety of indoor settings. |
| No Perceptible Flickering : Traditional tube lighting, driven by an AC current with a relatively low frequency, may produce flickering, which can lead to eye discomfort or injury, while LED tube lighting, driven by a DC current with a relatively high frequency, will not. |
| High Luminous Efficacy : The high luminous efficacy (lm/W) of LED lamps provides more light output (lm) with less power input (W) than traditional lighting solutions. This fact is turning LED lamps into mainstream products in the lighting industry. |
Features:
a) Ultra thin design, 15mm in thickness.
b) Superior raw material.
c) Dimmable optional.
d) High quality light source.
e) Leading heat sink design, four light emission instead of
backlight emission.
f) Wide range voltage input.
g) NO UV or infra-red radiation, no mercury or lead, eco-friendly,
no danger of broken glass.
h) Built-in high efficiency constant current driver, Wide Voltage
AC100-240V 50/60Hz input, worldwide application.
i) Low energy consumption, saves 60% power comparing conventional
light
j) 5 years lifespan (LED), 10 times more than traditional lamp.
k) Be equipped with short circuit, open circuit, lighting stroke,
power surge, overcurrent, over-voltage, overheat etc. protection
circuit.
l) Built-in high efficiency constant current driver, Wide Voltage
AC100-240V 50/60Hz input, worldwide application.
m) Easy to install, a perfect replacement for traditional
fluorescent tube.
n) 5 years lifespan or > 50,000hrs (LED), 10 times more than
traditional fluorescent tube.
o) Light diffusion lampshade or transparent lampshade, by
customized.
Applications:
LED panel light can be extensively applied to
general lighting, such as mall, store, hotel, office,
supermarket, commercial building, station, warehouse,
residential, parking lot, home, restaurant, railway, subway
station, bank, exhibition gallery, library, closet, factory, etc.
Replace conventional fluorescent lamp or sodium lamp. Energy
efficient and environmentally friendly.
Installation:
1. Unpack the SIMAO LED panel light from the packaging box.
2. Take out the LED driver and the LED panel light with caution.
3. Connect the LED driver and the LED panel light into the DC power
cord connector (red to red, black to black). Do not connect the LED
panel light into any other noncompatible
LED driver which may cause product damage.
4. The DC power cord connector should be properly connected, not
loose.
5. Turn off the main power source before installation to avoid
electric shock. Then properly insert Line (L) and Neutral (N) into
the AC power connector.
6. The AC power connector should be properly connected, not loose.
7. Remove the ceiling where the LED driver and the LED panel light
will be installed.
8. Carefully insert the LED driver and the LED panel light into the
removed ceiling.
9. Turn on the AC power to light up the LED panel light.
