Active Member
|
[China]
Address: Shenzhen, China
Contact name:Chris Guan
Shenzhen New Concept Optoelectronics Technology Co., Ltd |
|
Parameters:
Model | MS-PL18325 | ||
Input Voltage | AC90-264V 50/60Hz | ||
Dimension | Φ240*T14mm | ||
Lighting Source | 144pcs SMD3014(Epistar/Osram) | ||
Power Consumption | 15W | ||
Color Temperature | WW(2800~3300K) | NW(4000~4500K) | CW(6000~6500K) |
Luminosity | ≥900lm | ≥950lm | ≥1050lm |
CRI(Ra) | >70 | ||
Beam Angle | 180° | ||
Work Temperature | -25℃～+45℃ | ||
Material | Alu+PMMA | ||
GW | 1.5kg | ||
NW | 1.1kg | ||
Cap ends | / | ||
Lifespan (LED) | ≥50,000hrs (70% Lumen Maintenance) | ||
IP Rating | IP50 | ||
Lumen Attenuation | <5% @ 5,000hrs | ||
Packing Dimension | L300*W300*T50mm | ||
Features:
a) Ultra thin design, 15mm in thickness.
b) Superior raw material.
c) Dimmable optional.
d) High quality light source.
e) Leading heat sink design, four light emission instead of
backlight emission.
f) Wide range voltage input.
g) NO UV or infra-red radiation, no mercury or lead, eco-friendly,
no danger of broken glass.
h) Built-in high efficiency constant current driver, Wide Voltage
AC100-240V 50/60Hz input, worldwide application.
i) Low energy consumption, saves 60% power comparing conventional
light
j) 5 years lifespan (LED), 10 times more than traditional lamp.
k) Be equipped with short circuit, open circuit, lighting stroke,
power surge, overcurrent, over-voltage, overheat etc. protection
circuit.
l) Built-in high efficiency constant current driver, Wide Voltage
AC100-240V 50/60Hz input, worldwide application.
m) Easy to install, a perfect replacement for traditional
fluorescent tube.
n) 5 years lifespan or > 50,000hrs (LED), 10 times more than
traditional fluorescent tube.
o) Light diffusion lampshade or transparent lampshade, by
customized.
Applications:
LED panel light can be extensively applied to general lighting,
such as mall, store, hotel, office, supermarket, commercial
building, station, warehouse,
residential, parking lot, home, restaurant, railway, subway
station, bank, exhibition gallery, library, closet, factory, etc.
Replace conventional fluorescent
lamp or sodium lamp.Energy efficient and environmentally friendly.
Easy to install: LED light fixture and LED driver (included) are
all detachable.
• Low profile design; its height is less than 3/4 inch
• Sturdy aluminum housing, it does not sag
• Mounting hardware & a remote LED driver included
• Can be mounted on a wall & ceiling
• High quality diffuser achieves even and soft light output
• Perfect way to modernize your home or business by saving money on
your energy and maintenance costs
Installation:
1. Unpack the SIMAO LED panel light from the packaging box.
2. Take out the LED driver and the LED panel light with caution.
3. Connect the LED driver and the LED panel light into the DC power
cord connector (red to red, black to black). Do not connect the LED
panel light into any other noncompatible
LED driver which may cause product damage.
4. The DC power cord connector should be properly connected, not
loose.
5. Turn off the main power source before installation to avoid
electric shock. Then properly insert Line (L) and Neutral (N) into
the AC power connector.
6. The AC power connector should be properly connected, not loose.
7. Remove the ceiling where the LED driver and the LED panel light
will be installed.
8. Carefully insert the LED driver and the LED panel light into the
removed ceiling.
9. Turn on the AC power to light up the LED panel light.
