Active Member
|
[China]
Address: Shenzhen, China
Contact name:Chris Guan
Shenzhen New Concept Optoelectronics Technology Co., Ltd |
|
|
Parameters:
Model | MS-PL18322 | ||
Input Voltage | AC90-264V 50/60Hz | ||
Dimension | L300*W300*T13mm | ||
Lighting Source | 180pcs SMD3014(Epistar/Osram) | ||
Power Consumption | 20W | ||
Color Temperature | WW(2800~3300K) | NW(4000~4500K) | CW(6000~6500K) |
Luminosity | ≥1050lm | ≥1100lm | ≥1200lm |
CRI(Ra) | >75 | ||
Beam Angle | 180° | ||
Work Temperature | -30℃～+45℃ | ||
Material | Alu+PMMA | ||
GW | 2.2kg | ||
NW | 1.5kg | ||
Cap ends | / | ||
Lifespan (LED) | ≥50,000hrs (70% Lumen Maintenance) | ||
IP Rating | IP50 | ||
Lumen Attenuation | <5% @ 5,000hrs | ||
Packing Dimension | L350*W350*T50mm | ||
Applications:
LED panel light can be extensively applied to
general lighting, such as mall, store, hotel, office,
supermarket, commercial building, station, warehouse,
residential, parking lot, home, restaurant, railway, subway
station, bank, exhibition gallery, library, closet, factory, etc.
Replace conventional fluorescent lamp or sodium lamp.Energy
efficient and environmentally friendly.
Easy to install: LED light fixture and LED driver (included) are
all detachable.
• Low profile design; its height is less than 3/4 inch
• Sturdy aluminum housing, it does not sag
• Mounting hardware & a remote LED driver included
• Can be mounted on a wall & ceiling
• High quality diffuser achieves even and soft light output
• Perfect way to modernize your home or business by saving money on
your energy and maintenance costs
Installation:
1. Unpack the SIMAO LED panel light from the packaging box.
2. Take out the LED driver and the LED panel light with caution.
3. Connect the LED driver and the LED panel light into the DC power
cord connector (red to red, black to black). Do not connect the LED
panel light into any other noncompatible
LED driver which may cause product damage.
4. The DC power cord connector should be properly connected, not
loose.
5. Turn off the main power source before installation to avoid
electric shock. Then properly insert Line (L) and Neutral (N) into
the AC power connector.
6. The AC power connector should be properly connected, not loose.
7. Remove the ceiling where the LED driver and the LED panel light
will be installed.
8. Carefully insert the LED driver and the LED panel light into the
removed ceiling.
9. Turn on the AC power to light up the LED panel light.
