|
Trade Verify
Address: 3F./4F., Zhenyingtai Technology Park, Hebei Industry Zone, Longhua New District, Shenzhen 518109, China
Contact name:Amy Cheah
EASTLONGE ELECTRONICS(HK) CO.,LTD |
|
Verified Suppliers
|
|
|
6 Channels Handheld 60W High Power 1500m Coverage Anti Drone Jammer UAV Killer RF Blocker
Main Features of Drone Jamming Gun EST-710A6
1). Cut off all contact between the drone and the controller: the remote control of drone would fail.
2). The drone's controller on ground can not receive pictures and videos of aerial photography;
3). Make a drone not able position; the interceptor can force the drone to land or return.
Host Parameters
1. Weight: 5.5 kg (not including charger);
2. Host size: L 755mm x W 256mm x D 60mm;
3. Sci-Fi design;
4. Host structure: high-strength ABS material, which can reduce the device’s weight;
5. Power supply: Built-in rechargeable 1pc DC 24V 8000mAh lithium battery, can continuously work for about 90~120 minutes;
6. Maximum Power Output: 60W (2.4G WIFI: 10W; 5.8G WIFI: 10W; 1.4G GPS: 10W; 1.5G GPS: 10W; GSM800: 10W; GSM900: 10W; 6 bands in total)
7. Intercept Way: forced return,forced landing, hovering, image transmission interference
8. Control Distance: ≤1500 meters
9. Trigger Life: >100,000 times
10. Operation Method: switch on, aim at UAV target and then shoot to intercept;
11. Working temperature: -10°C - +55°C;
12. Storage temperature: -20°C - +60°C;
Transmitting Frequency & Power Output
Frequency Band & Power Output:
| Band Name | Frequency Range | |
| GPS L1 | 1560-1620MHz | Navigation and positioning GPS signal is weak, considering the overall weight and power consumption of the device, the power can be 10W, and the interference effect of the power interference source is equivalent to the remote interference effect of the F1 band. 10W (40±1dBm) |
| GPS | 1430-1444MHz | Navigation and positioning GPS signal is weak, considering the overall weight and power consumption of the device, the power can be 10W, and the interference effect of the power interference source is equivalent to the remote interference effect of the some civil use band. 10W (40±1dBm) |
| 2.4G WIFI | 2400-2486MHz | UAV picture transmission frequency is wide, and the transmission loss of the UAV picture transmission equipment is large. The interference effect made by the equipment as a whole and the F1 frequency band remote interference effect can be achieved. 10W (40±1dBm) |
| 5.8G WIFI | 5720-5850MHz | UAV picture transmission frequency is wide, and the transmission loss of the UAV picture transmission equipment is large. The interference effect made by the equipment as a whole and the F1 frequency band remote interference effect can be achieved. 10W (40±1dBm) |
| 800MHz | 840-845MHz | Remote control signal is point-to-point communication, which concentrates the power at one point and makes the remote control distance farther. All high-efficiency modules must be used to achieve effective interference distance. 10W (40±1dBm) |
| 900MHz | 902-928MHz | Remote control signal is point-to-point communication, which concentrates the power at one point and makes the remote control distance farther. All high-efficiency modules must be used to achieve effective interference distance. 10W (40±1dBm) |
Basic Working Principle
Our portable drone jammers can take over and control the UAV in the state of flying and cut off all the connections between UAV and remote control or ground station distantly by launching high-power electromagnetic waves. With our portable drone jammers you can make the UAV unable to transmit videos and images, and make it return / land / hover according to the setting program of the drone.
1. When jamming the GPS satellite navigation signal (1.4G & 1.5G), the drone can not locate, can not fly according to the GPS satellite navigation, but can be controlled remotely.
2. When jamming the remote control (800MHz, 900MHz and 2.4G) and image transmission signals (2.4G or 5.8G), the drone can not be controlled remotely, and it is impossible to transmit videos or images.
3. When simultaneously jamming the GPS satellite navigation signals (1.4G & 1.5G), remote control (800MHz, 900MHz and 2.4G) and image transmission signals (2.4G or 5.8G), the drone can not be controlled remotely, can not transmit videos or images. It will return / land / hover according to the drone setting program.
4. For different drone models and brands, after jamming, the drone’s actual execution action will be different.
Operation Method
1. Interfere with the remote control and the image transmission signals: turn on the 800MHz / 900MHz / 2.4G (800MHz, 900MHz and 2.4G use the same button to control) and 5.8G switches, pull the trigger and keep it, when it beeps, aim at the drone.
2. Interfere with the GPS satellite navigation, remote control, and image transmission signals: turn on GPS 1.6G and GPS 1.4G, 800MHz / 900MHz / 2.4G & 5.8G switches, pull the trigger and keep it, when it beeps, aim at the drone.
3. After use, turn off GPS 1.6G and GPS 1.4G, 800MHz / 900MHz / 2.4G, 5.8G switches to avoid pulling trigger by mistake, turn off the battery voltage display switch.
4. Charging: open the waterproof and dust-proof plug of the charging stand at the bottom of the battery compartment, insert the charger plug into the charging port, when the charger indicator lights in red color, it’s charging; when the charging is completed (or the charger is not inserted), the charger indicator lights in green color.
5. Check the battery voltage: turn on the switch on the battery, it will display the battery voltage instantly, when the battery voltage is lower than 22V, please charge it in time.
