BOUKIN TECHNOLOGY CO.,LTD |
|
Specifications | |
Model | UTi165K |
Sensor | Uncooled focal plane |
Temperature range | 30C~45C |
Resolution | 0.1C |
Accuracy | ±0.5C @1m |
Minimum measuring distance | 15cm |
Temperature measurement response time | ≤500ms (95% of reading) |
Pixel of thermal imagery | 19200 (160×120) |
Pixel dimemsions | 12μm |
Palettes | Iron red, rainbow, white, black, red, lava, high-contrast rainbow |
Bandwidth of infraed spectroscopy | 8~14μm |
Field of view (FOV) | 56°(H) × 42°(V) |
Instantaneous field of view (IFOV) | 6mrad |
Thermal imaging sensitivity | <50mk |
Frame rate | <9Hz |
Temperature display | Center temperature measurement and high temperature tracking (default) |
Image format | BMP |
Buttons | 10 buttons: POWER button, Camera button, Return button, Navigation buttons, SET button, SET button, Browsing button, LED lighting button |
Image modes | Thermal imagery, digital camera (visible light), fushion |
Temperature measuring point | Besides central point, 3 temperature measuring points can be added |
Visible light | √ |
Resolution of visible light | 640×480 |
Display resolution | 320×240 |
Mixed setting | 0% (total visible light), 25%, 50%, 75%, 100% (total thermal imagery) |
PC analysis software (PC) | √ |
Real-time image transmission | √ (PC softw image projection) |
Data communication | Type-C USB |
Auto power off | Selectable (5min, 10min, 30min), 30min auto power off (default) |
Service time | >6 hours |
Charging time | <5 hours |
Charging voltage/current | 5V/2A |
Image storage | Micro SD card |
General Characteristics | |
Power | A single Li-ion 3.7V/5000mAh 26650 battery |
Display | 2.8" TFT LCD |
Product color | Red & grey |
Product size | 236mm x 75.5mm x 86mm |
Standard accessories | Manual, Type-C USB cable, 16GB TF card |
Standard carton gross weight | 2.2kg |
1. Safety Instructions
To ensure proper use of this product, please read the instructions
carefully
before using.
●The optimal measuring distance for this product is 1 meter.
●To ensure measurement accuracy, please use the product in an
operating
environment of 15°C- 30°C, <85% RH (non-condensing).
●Please use the product indoors without wind.
●When changing to a new environment, please turn on the product and
leave
it for 10 to 15 minutes before measuring.
The ambient temperature for measuring must be stable. Do not
measure in
places with large airflow such as fans and air outlets.
●When the measured object comes from a place with a large
temperature
difference from the measurement environment, keep it in the
measurement
environment for 10 to 30 minutes before measuring.
●The product tests the surface temperature of the object. If
temperature
compensation is needed, please adjust in the Settings menu.
●The product has a self-calibration function. If the reading jumps
quickly, please
read the temperature after it gets steady.
●After measuring extremely high or low temperature objects, please
leave the
product for 10 minutes before next use.
Do not use the product in places with strong sunlight or
electromagnetic
interference.
) Please do not use the product in flammable, explosive, steamy,
wet or corrosive
environments.
●Please stop using the product if it is damaged or modified to
avoid inaccurate
measurement results.
●Please use the correct emissivity to obtain accurate temperature
readouts.
●To ensure accuracy of the product, please warm it up for 10 to 15
minutes
before measuring if it has not been used for a long time.
●When being charged, the internal temperature of the product rises,
which will
lead to inaccurate temperature measurement. So, it is not
recommended to
take measurements during or right after charging the product.
Delivery:
Send by DHL, ready to ship, have in stock
Packaging
60pcs packed in a carton, support customized packing
FAQ
1. Q: About the price?
A: We can design and make different level products refer to your price.
2. Q: About the sample?
A: If you cooperate for the first time, you need to pay the cost of samples and express delivery. If there is follow-up cooperation, you will not need to pay for the samples. If the samples need to be made, you will pay the cost of making samples.