|Product Name|| Edan Fetal Transducer|
F3/Cadence, MS9-01916-A2, MS3-01916-A2, MS3-31527(A)
|Spo2 Accuracy||3 (70%~99%)|
|Pulse Rate Accuracy||2bpm|
|Pulse Rate Accuracy||30bpm~240bpm|
2. Product Photo
-1. High quality and competitive price
-2. CE& ISO13485 approved
-3. Professional manufacturer
-4. Best and prompt service & delivery timely
-5. high performance
1)Pls read the instruction manual before use.
2)Ultrasonic probe is precious device, pls take a great care not to
clash the head in the using process. pls carefully protect the head
of probe during the transportation.
3)When install and remove the probe should shut down the machine
main power supply first.
4)Should avoid contact with organic solvent, otherwise the probe
will be damaged by contact with organic solvent cracking, it can
use alcohol, but acetone wiped is not allowed.
5)Protect the lens surface. Once the lens surface damage, coupling
agent is easy to piezoelectric the internal, so pls take care not
to sharp the objects.
6)Pls use the Non-corrosive coupling agents, it will not stimulate
the skin. And with the corrosive agents will damage the lens.
7)If you want to soak disinfection, please according to the
manufacturer's manual operation, otherwise the probe internal
circuit may ruin due to the water and even burn out.
8)May not be high temperature sterilization, because the probe made
of piezoelectric ceramics, high temperature will make the
piezoelectric effect to weaker it, single crystal material probe as
9)Should be check carefully before use, the probe shell, cables to
see if there is any breakage, in case the probe work under high
voltage electric shock cuts.
10)After use, must keep the probe coupling agent wiped clean, in
case of a mouse or other animals gnawing on the lens.