Active Member
|
[China]
Address: NO.501,Floor 5,Building31, Lane 1555, West Jinshajiang Road, JiaDing District, Shanghai ,China
Contact name:Emily Wang
Shenzhen Sysolution Cloud Technology Company Limited |
|
|
D60-320 is a standard receiving card launched by Xixun Technology. It adopts 8 standard HUB320 (26Pin) interfaces, and supports maximum 32 groups of the RGB parallel data. The maximum loading capacity could reach up to 512x640 pixels; with powerful processing ability, super reliability and high competitive price.
(RGB) RGB Parallel | Data interfaces/Number | Driver | The Maximum Loading Capacity (Pixel s) | Loading Capacity(Pixel s) Loading Capacity After lightness Calibrating (Pixels) | Loading Capacity after Color Calibrating (Pixels) |
| 32 Groups | HUB320/8 interfaces | General | 512*640 | 512*640 | 512*512 |
| PWM | 512*640 | 512*640 | 512*512 |
Single Network Port Cascading Quantity | Scanning Lines Supported | ||
| ≤1000PCS | 1-64 Scan |
| Functions | Introduction |
| Improved display | 1. Supports point-to-point brightness and chroma calibration: With the Calibration software, it can calibrate each one of the pixels on its brightness and chroma of the large screen, so as to effectively eliminate colour differences, enhance consistency of the brightness and chroma to reach a high level, and improve the quality of the display. 2. Support multiple solutions of the display effects: with LedSet4.0 software, its refresh and greyscale performances are able to take the precedence over other settings. 3. Support 90 degree screen rotation of the led screen: with LedSet4.0 software, the screen of the receiving card can be rotated by 90 degree. 4. Support screen zoom: with LedSet4.0 software, the pixels on the receiver card can be scaled in multiples to zoom in and out of the display. |
| Improved operation | 1. Support detection of the receiving card sequence number: with network port testing function on the LedSet4.0 software, the target box will display the receiving card serial number and the network port information. User will able to know thelocations of the receiving cards as well as its Connection diagram. 2. Support data port user-definition: with LedSet4.0 software, users can detect and edit the output data of the receiving cards. 3. Support the construction of complicated boxes: with the‘Advanced Setting’ on the LedSet 4.0 software, users can quickly arranged and constructed the box modules in any way. 4. Support the construction of complicated and large screens: with “Complicated Led Screen Connection” on the LedSet 4.0 software, users can quickly arranged and constructed the boxes in any way. |
| Hardware Stability | 1. Network Cable Backup: The network port is connected via a main and backup network loop to increase the reliability of the receiving card's serial connection. When one of the main and backup serial lines fails, the other one will take its job to keep the led display working properly. |
| Smart software | 1. Support reading back the configuration parameters of the receiver card: with LedSet 4.0 software, users can read back the current configuration parameters of the receiver card. 2. Support network cable BER detection: with LedSet 4.0 software, users can monitor the communication signal quality of the network cable connected to the system hardware in real time so as to quickly determine whether the network cable is good or bad and then get rid of any errors immediately. 3. Support communication monitor: with LedSet 4.0 software, users can monitor the Real-time working status of the receiver card. |
32 Parallel Data Interface Definitions
External interfaces
1. TEST_1,Normally high level, when low level is detected, output test signal
2. LEDR,On when turn on power normally
3. LEDG,When the signal is fed from the PO port, the light flashes faster；When the signal is fed from the PI port, the light flashes slower.
| Definition of the external interfaces between the LED and the button | |
| NO. | Type |
| 1 | GND Negative pole of the switch |
| 2 | Positive pole of the external switch |
| 3 | Negative pole of the external red light, illuminated when powered on |
| 4 | +3.3V voltage |
| 5 | negative poke of the external green light |
| Definition | PIN | PIN | Definition |
| R | 1 | 2 | 6 |
| B | 3 | 4 | D_x (Read storage) |
| R | 5 | 6 | G |
| B | 7 | 8 | GND |
| R | 9 | 10 | G |
| B | 11 | 12 | GND |
| R | 13 | 14 | G |
| B | 15 | 16 | GND |
| OUT_A1 | 17 | 18 | OUT_B1 |
| OUT_C1 | 19 | 20 | OUT_D1 |
| OUT_E1 | 21 | 22 | GND |
| OUT_CLK1 | 23 | 24 | OUT_LA1 |
| OUT_OE1 | 25 | 26 | GND |
J6 PIN Definition
| PIN | 1 | 2 | 3 | 4 |
| Definition | GND | SWCLK | SWDIO | +3.3V |
J11 PIN Definition
| Definition | VBB | GND | FLS_S | FLS_DO | FLS_CLK |
| Pin | 1 | 2 | 3 | 4 | 5 |
| Pin | 10 | 9 | 8 | 7 | 6 |
| Definition | VBB | GND | mCONF_DONE | PROGRAM_B | FLS_DI |
| Indicator | Position | Status | Illustration |
| Status indicator(green) | U6 | Flickering Slowly at a constant | It means the receiving card is working properly, the Ethernet Cable Connection is fine and there is no DVI Signal Input. |
Flickering Fast at a constant | It means the receiving card is working properly, the Ethernet Cable Connection is fine, and there is DVI Signal Input.
| ||
| It goes out | It means there is No Gigabit Ethernet Signal. | ||
| Fast Flickering 3 Tunes | It means the receiving card is working properly, the Ethernet Cable Loop Connection is fine, and there is DVI Signal Input. | ||
Status indicator (red) | U5 | solid On | It means the power is On |
Dimension:
| Electric Parameters | Input Voltage | DC3.5-5.5V |
| Rated Current | 0.6A | |
| Rated Power | 3W | |
| Electric Parameters | Operating Temperature | -20℃-70℃ |
| Operating Humidity | 10%RH-90%RH | |
| Storage Environment | Temperature | -25℃～125℃ |
| Board card dimensions | 144.02mmX91.19mm | |
| Net Weight | 110g | |
| Certifications | It conforms to RoHS and CE-EMC standards. | |
