Active Member
|
[China]
Address: NO.501,Floor 5,Building31, Lane 1555, West Jinshajiang Road, JiaDing District, Shanghai ,China
Contact name:Emily Wang
Shenzhen Sysolution Cloud Technology Company Limited |
|
|
D60-12 is a standard receiving card launched by Xixun Technology. It adopts 12standard HUB75E interfaces and supports up to 24 groups of RGB parallel data. Load up to 512X384 pixels; It has strong processing capacity, super stable performance and high cost performance.
| Three parallel lines(RGB) | Data interface/quantity | Drive | Maximum load (Pixels) | Brightness correction band load (Pixels) | Chromatically correction with load (Pixels) |
| 24 group | HUB75E/12 | General | 512*320 | 512*256 | 256*320 |
| PWM | 512*384 | 512*256 | 256*320 |
| Number of cascade cards | Support scan line | ||
| ≤1000PCS | 1-64 scan |
| Function | Instructions |
| Improved Display Effect |
|
| Improved Operation |
|
| Improved Hardware Stability | 1. Network port hot backup:Network ports increase the reliability of serial connecting of the receiving card through the loop connection of the main and standby network cables. When one of the main and standby series lines fails, the other can ensure the normal display of the screen. 2. Support hardware reset function:The receiving card can restart the online hardware by itself after the hardware online upgrade is completed. |
| Intelligent Software Upgrade | 1. Support receiving card configuration parameter read back:Can read back the current receiving card configuration parameters on LedSet 4.0. 2. Support network cable bit error rate detection:On LedSet 4.0, the quality of the network cable communication signal connected to the system hardware can be monitored in real time to quickly judge the quality of the network cable and troubleshoot. 3. Communication monitoring function:Monitor the working status of the receiving card in real time on LedSet 4.0. |
24 Parallel Data Interface Definitions
JP1——JP12 Data Interface Definition
| Description | Definition | Pin | Pin | Definition | Description |
| RGB Data output | R | 1 | 2 | G | RGB Data output |
| B | 3 | 4 | GND | ground | |
| R | 5 | 6 | G | RGB Data output | |
| B | 7 | 8 | HE | Line decoding signal | |
| Line decoding signal | HA | 9 | 10 | HB | |
| HC | 11 | 12 | HD | ||
| Shift clock output | CLK | 13 | 14 | LAT | Latch signal output |
| Display enabl(remarks1) | OE | 15 | 16 | GND | ground |
Note 1: Pin 15 is the display enable pin. When PWM chip is used, it is GCLK signal.
J16 Interface definition
| Definition | Pin | Pin | Definition |
| +5V | 1 | 2 | GND |
| FLS_CS | 3 | 4 | FLS_DO |
| FLS_CLK | 5 | 6 | FLS_DI |
| PROGRAM_B | 7 | 8 | mCONF_DONE |
| GND | 9 | 10 | +5V |
J12 Indicator interface definition
| Pin | 1 | 2 | 3 | 4 | 5 |
| Definition | GND/KEY- | KEY+ | LEDR- | VCC/LED+ | LEDG- |
J14 Power socket definition
| Pin | 1 | 2 | 3 | 4 |
| Definition | VCC | VCC | GND | GND |
| Indicator | Location | State | Description |
Status indicator (green) | U1 | Flashes evenly and slowly | The receiving card works normally, the network cable is connected normally, and there is a DVI signal input. |
| Flashes evenly and quickly | The receiving card works normally, the network cable is connected normally, and there is a DVI signal input. | ||
| Off | No Gigabit signal | ||
| 3 flashes quickly at intervals | The receiving card works normally, the network cable circuit is in connection, and there is a DVI signal input. | ||
Status indicator (red) | U3 | On | Normal power supply |
Dimension:
| Electrical parameters | Input voltage | DC3.5-5.5V |
| Rated current | 0.6A | |
| Rated power | 3W | |
| Working environment | Working temperature | -20℃ - 70℃ |
| Working humidity | 10%RH-90%RH | |
| Storage environment | Working temperature | -25℃～125℃ |
| Board size | 144.02mmX91.19mm | |
| Net weight | 100.8g | |
| Certification Information | RoHS Compliant, CE-EMC Compliant | |
