Caster Nylon 75mm Industrial Casters With Brakes 700kg

                How to Choose the Right Industrial Casters
How to choose the right caster product is a problem for the layman, here our factory will answer it for you:
1. First of all, the material of the caster wheel must be selected: usually the wheel material is nylon,

rubber, polyurethane, elastic glue, iron core-wrapped polyurethane, cast iron, plastic, etc. Polyurethane

wheels can meet your handling requirements regardless of whether they are running on indoor or outdoor

ground; elastic rubber wheels can be used for hotels, medical equipment, wooden floors, tile floors and

other grounds that require little noise and quiet when walking; nylon wheels, The iron wheel is suitable for

the site where the ground is uneven or there are iron filings and other substances on the ground.
2. How to choose the correct caster bracket: Usually, when choosing a suitable caster bracket, the first

consideration is the weight of the caster, such as supermarkets, schools, hospitals, office buildings, hotels

and other places. Because the ground is good, smooth and the goods handled are lighter, (each The casters

can carry 50-150kg), and it is suitable to choose the electroplating wheel frame which is stamped and formed

with a thin steel plate of 3-4mm. The wheel frame is light, flexible in operation, quiet and beautiful. If the beads

are often moved or handled, double-row beads should be used; in factories and warehouses, where the goods

are frequently transported and the load is heavy (each caster carries 150-680kg), it is suitable to use thick

steel plate 5-6mm stamping hot forging And welded double-row ball wheel frame; if it is used to transport

heavy objects such as textile factories, automobile factories, machinery factories, etc., due to the heavy

load and long walking distance (each caster carries 700-2500kg), it should be selected to The wheel frame

is welded after cutting the thick steel plate 8-12mm. The movable wheel frame uses plane ball bearings and

ball bearings on the bottom plate, so that the casters can bear heavy loads, rotate flexibly, and resist impact.
3. How to calculate the bearing weight of casters: In order to be able to calculate the load capacity required

by various casters, it is necessary to know the self-weight of the transport equipment, the maximum load and

the number of single wheels and casters used. The required load capacity of a single wheel or caster is

calculated as follows: T=(E+Z)/MxN: T= required load capacity of a single wheel or caster; E= self-weight

of transport equipment; Z= maximum load; M= used single wheel The number of wheels and casters;

N = safety factor (about 1.3-1.5).
4. Select the diameter of the caster: Usually, the larger the diameter of the wheel, the easier it is to push,

the greater the load capacity, and the better the protection of the ground from damage. The selection of the

wheel diameter should first consider the load and the starting of the truck under the load. thrust to decide.
5. Ensure the rotation flexibility of the wheel: the larger the single wheel, the more labor-saving it is to rotate,

the needle roller bearing can carry heavier loads, and the resistance is larger during rotation; the single wheel

is installed with high-quality ball bearings, which can carry heavier loads and rotate. Lighter, flexible and quiet.
6. Temperature condition of the product: Severe cold and high temperature have a great impact on the

caster, such as the polyurethane wheel at a low temperature of minus 45 °C, it can rotate flexibly and

freely, and the high temperature resistant wheel can rotate easily at a high temperature of 270 °C. 

Industrial Swivel Casters Parameter

Industrial Swivel Casters Describe

Industrial Swivel Casters Size

Industrial Swivel Casters Material

Industrial Swivel Casters Scope of application

Application.

About us.

KTC.