Active Member
|
[China]
Address: No. 7 Tengren Road, Niulanshan Industrial Park, Shunyi District, Beijing
Contact name:
BEIJING KOREA TECHNOLOGY CASTER CO.,LTD |
|
|
fixed rigid flange nylon caster wheels outdoor Industrial casters KT-PH80T-150
How to make castors last longer
How to prolong the service life of casters is the concern of many users. Hanke casters will focus
on the following:First, confirm the caster selection with the caster supplier, involving the bearing
of the caster, and the material shall be selected reasonably according to the actual application
environment. There are still some factors to pay attention to after product selection, as follows:
1. Casters shall be correctly and reliably installed at the designed position.
2. The installed caster support must have sufficient strength and reliable materials.
3. The function of casters shall not be changed and shall not be affected by the installation device.
4. The rotating axle must always be vertical.
5. The fixed casters must be in line with their axles.
6. If only rotating casters are used, they must be consistent.
7. If fixed casters are used with rotating casters, all casters must be compatible with each other and
must be recommended by the manufacturer. If casters are used in the following areas: outdoor, coastal
areas, areas with strong corrosion and / or harsh service conditions, special products must be specified.
When the temperature is lower than 5 ℃ and higher than 30 ℃, the efficiency of casters will decrease,
especially when the service temperature is lower or higher than the above data, the listed normal load
may be affected. Special products will be described in detail. The complete caster is assembled from
the components. The manufacturer is only responsible for the complete castors manufactured from
the original parts.
Daily maintenance of casters: oil lubrication of axles and rotating bearings; After installation, tighten
the axle and / or adjustable center pin. Any detergent used shall not contain corrosive and abrasive
components.
Heavy Duty Swivel Casters Parameter
| model | KT-PH80T-150 |
| Wheel material | Mc Nylon |
| Load Capacity | 3000KG |
| Wheel Diameter | 150mm |
| Tread Width | 80x2mm |
| Load Height | 220mm |
Heavy Duty Swivel Casters Describe
Heavy Duty Swivel Casters Size
Heavy Duty Swivel Casters Material
| Name | Material | Treatment | |
| 1 | Caster Seat | Steel 45 | Black Coated |
| 2 | Body | Steel 45 | Black Coated |
| 3 | Wheel | Polyurethane + AL/Mc Nylon | - |
Heavy Duty Swivel Casters Scope of application
KTC (Bejing Korea Technology Caster Co., Ltd.) was founded in 2007. KTC is a modern
company specialzingin the production of multi function &high quality CASTER and
KT FOOT based on best design and design technology.
The company is headquartered in Niulanshan Industrial Zone,Shunyi District, Beijing. KTC
adopts international advanced production testing equipments, professional intelligent
production management system and professional design flow. Now the company produces
multi function & high quality production, such as KT CASTER and KT FOOT, among which
high quality of height adjusting CASTER,shockproof type CASTER, high quality of height
adjusting CASTER, shockproof type CASTER,high load CASTER and level adjusting FOOT
are widely used in the world's advanced automation equipment and semiconductor e
quipment industry.
In order to manufacture the world's highest level of products,KTC
use the best processing
technology and equipment. And KTC continuously launches world top level of new products.
KTC's s also has set up a branch in Korea, so it is favored by theusers of various fields around
the world.
