Active Member
|
[China]
Address: No. 7 Tengren Road, Niulanshan Industrial Park, Shunyi District, Beijing
Contact name:
BEIJING KOREA TECHNOLOGY CASTER CO.,LTD |
|
|
How can I remove the broken screw
Beijing KTcaster to find out how to remove the broken screw?
1. After the hole is drilled through, remove the small drill bit,
replace it with a drill bit with a diameter
of 16mm, and continue to expand and drill through the broken bolt hole. Firstly, remove the sludge
on the surface of the broken screw and the broken head, use the central gun to kill the central gun
of the section, and then use the electric drill to install a drill bit with a diameter of 6-8mm to drill at the
central gun hole of the section. Note that the hole must be drilled through.
2. When starting surfacing, the arc striking shall not be too long
to avoid burning through the outer
wall of the broken bolt. After surfacing to the upper end face of the broken bolt, continue surfacing
to produce a cylinder with a diameter of 14-16mm and a height of 8-10mm. Take the welding rod with
a diameter of less than 3.2mm and weld the broken bolt from inside to outside with medium and small
current. At the beginning of surfacing, take half of the whole length of the broken bolt
3. After surfacing, hammer the end face with a hand hammer to make
the broken bolt vibrate along its
axis
4. After careful observation, when a small amount of rust is found
to leak from the fracture after
knocking, M18 nut can be sleeved on the surfacing column head and welded.
5. After welding, cover the nut with a ring wrench while it is hot,
twist it left and right, or knock the end
face of the nut with a small hammer while twisting it back and forth, so as to take out the broken bolt.
6. After taking out the broken bolt, process the screw thread in
the frame with a suitable screw hammer
to remove rust and other sundries in the hole.
Heavy Duty Adjustable Feet Parameter
Heavy Duty Adjustable Feet Size
Heavy Duty Adjustable Feet Material
| Name | KTC Foot |
| Model | KTF-TR |
| Type | Ultra Heavy Duty Purpose Type Series |
| Application | Machine tools, Automatic facilities, Special machine, LCD
equipment, Semiconductor equipment, Heavy duty equipment |
Heavy Duty Adjustable Feet Describe
Heavy Duty Adjustable Feet Scope of application
KTC (Bejing Korea Technology Caster Co., Ltd.) was founded in 2007. KTC is a modern
company specialzingin the production of multi function &high quality CASTER and
KT FOOT based on best design and design technology.
The company is headquartered in Niulanshan Industrial Zone,Shunyi District, Beijing. KTC
adopts international advanced production testing equipments, professional intelligent
production management system and professional design flow. Now the company produces
multi function & high quality production, such as KT CASTER and KT FOOT, among which
high quality of height adjusting CASTER,shockproof type CASTER, high quality of height
adjusting CASTER, shockproof type CASTER,high load CASTER and level adjusting FOOT
are widely used in the world's advanced automation equipment and semiconductor e
quipment industry.
In order to manufacture the world's highest level of products,KTC
use the best processing
technology and equipment. And KTC continuously launches world top level of new products.
KTC's s also has set up a branch in Korea, so it is favored by theusers of various fields around
the world.
