Top and Bottom Cover Plate Industrial Air Spring Diameter 231mm For Large Drying Machines

Top and Bottom Cover Plate Diameter 231mm Industrial Air Spring For Large Drying Machines

3B6601

Air springs have solved vibration and noise problems in multiple applications

• machine controls
• Check valve grinding
• Jet engine testing platforms (isolation and thrust absorption)
• Industrial suspension systems
• Spray gas generator
• Large drying machines (milk dryers)
• Foundry shake-out systems
• Swash plate of motor
• Centrifugal separators
• Scales and weight control equipment
• Wave power module
• Presses
• Compressors, fans and blowers
• The positioning device
• Textile looms
• Reduction of sever impact and elimination of impact idlers at
• conveyor load points
• Environmental protection equipment air spring,

three convolution bellows need to take care of these suggestions

Special happened to air three convolution bellows Spring conditions at a certain load and deflection. In order to Remained stable throughout three convolution bellows air springs Must fully support the maximum outer diameter Air springs. In addition, retainers must end Hidden approximately 0.75 " to the support surface, Or be accompanied by a special rubber ring mounted on the outside .The diameter of the retainer. Contact Goodyear engineered Product design of air spring on behalf of assistance. Special consideration to sleeve-shaped bellows When handling the air spring or below .Listed in the table height, care must be taken to avoid Flexible members contact with obstacles. Air spring Should be installed on a flat and Lower retainers, or a base . And the base plate are specified in the table.