Shanghai Galaxy International Trade Co.,LTD |
Verified Suppliers
|
|
trimble rtk gps R10, trimble gps receiver
Expanded Trimble xFill functionality will now allow surveyors to
continue collecting data with centimeter accuracy indefinitely
after connection is lost with their base station or VRS network.
Powered by Trimble RTK technology, Trimble xFill allows unlimited
and continuous RTK accuracy with no degradation in precision,
through a subscription to Trimble’s CenterPoint RTX service.
With a CenterPoint RTX subscription, surveyors can remain
productive indefinitely outside of radio range and avoid the costly
need to move their base station or utilize an optical total
station.
Without a Trimble CenterPoint RTX subscription, xFill maintains RTK
level accuracy for up to five minutes during interruptions in the
primary terrestrial correction stream. xFill functionality is built
into every Trimble R10 GNSS system.
The Trimble CenterPoint RTX subscription:
positioning performance | |
code differential gnss positioning | |
Horizontal | 0.25 m + 1 ppm RMS |
Vertical | 0.50 m + 1 ppm RMS |
SBAS differential positioning accuracy | typically <5 m 3DRMS |
static and Faststatic gps surveying | |
Horizontal | 5 mm + 0.5 ppm RMS |
Vertical | 5 mm + 1 ppm RMS |
Kinematic surveying | |
Horizontal | 10 mm + 1 ppm RMS |
Vertical | 20 mm + 1 ppm RMS |
Initialization time5 | typically <10seconds |
Initialization reliability5 | typically >99.9% |
hardware | |
Dimensions (W×H) | 19 cm × 11.2 cm |
Weight | 1.35 kg |
Temperature6 | 40 °C to +65 °C |
Humidity | 100%, condensing |
Water/dustproof | IP67 |
Shock and vibration | Tested and meets the following environmental standards |
Shock | Non-operating:Designed to survive a 2 m (6.6 ft) pole drop onto concrete. Operating: to 40 G, 10 msec, sawtooth |
Vibration | MIL-STD-810F, FIG.514.5C-1 |
electrical | |
Power 11 V DC to 28 V DC external power input with over-voltage
protection on Port 1 (7-pin Lemo) | |
Rechargeable, removable 7.4 V, 2.4 Ah Lithium-Ion battery. Power
consumption7 is 3.2 W, in RTK rover mode with internal radio . | |
Operating times on internal battery | |
– 450 MHz receive only option 5.3 hours, varies with temperature | |
450 MHz receive/transmit option 3.5 hours, varies with temperature and wireless data rate | |
GSM/GPRS 3.8 hours, varies with temperature | |
Certification Class B Part 15, 22, 24 FCC certification, 850/1900
MHz. Class 10 GSM/GPRS module. CE Mark approval, and C-tick approval |
communications and data storage | |
Serial: 3-wire serial (7-pin Lemo) | |
USB: supports data download and high speed communications | |
Radio Modem: fully Integrated, sealed 450 MHz wide band
receiver/transmitter with frequency range of 410 MHz to 470 MHz | |
Transmit power: 2 W | |
– Range: 3–5 km typical / 10 km optimal | |
Cellular: integrated, 3.5 G modem, HSDPA 7.2 Mbps (download), GPRS multi-slot class 12, EDGE multi-slot class 12, UMTS/HSDPA (WCDMA/FDD) 850/1900/2100MHz, Quad-band EGSM 850/900/1800/1900 MHz, GSM CSD, 3GPP LTE | |
Bluetooth: fully integrated, fully sealed 2.4 GHz communications port | |
WiFi: 802.11 b,g, access point and client mode, WPA/WPA2/WEP64/WEP128 encryption | |
External communication devices for corrections supported on – Serial, USB Ethernet, and Bluetooth ports | |
Data storage: 4 GB internal memory; over three years of raw
observables (approx. 1.4 MB /day), based on recording every 15 seconds from an average of 14 satellites | |
CMR+, CMRx, RTCM 2.1, RTCM 2.3, RTCM 3.0, RTCM 3.1 input and output | |
24 NMEA outputs, GSOF, RT17 and RT27 outputs | |
webui | |
Offers simple configuration, operation, status, and data transfer | |
Accessible via WiFi, Serial, USB, and Bluetooth | |
supported trimble controllers | |
Trimble TSC3, Trimble CU, Trimble Tablet Rugged PC | |
certifications | |
FCC Part 15 (Class B device), 22, 24; R&TTE CE Mark; C-Tick, A-Tick; PTCRB; WFA |