Active Member
|
[China]
Address: No. 879, Ganghua Road, Hongguang Town, Pidu District, Chengdu
Contact name:admin
Chengdu Wanggan Technology Co., Ltd. |
|
|
GNSS GPS Survey Equipment Handheld Agriculture GPS Land Meter Measuring Tools
Display Format Setting Interface
Shift Parameter
1. In the home screen of the device, press the [Setting] button to enter the interface of setting.
2. Please press the [▲][▼] button to move to the option of "Shift Parameter",and press the [Enter] button to enter.
3. After entering the interface of "Shift Parameter", select and enter.
4. After entering the interface of " Shift Parameter", press the [Enter] button to switch the parameter that need to be changed, and press the [▲][▼] button to change the specific content.
5. Please press the "Start" button to exit after setting.
Gaussian Parameter Setting Interface
Elevation Calibration
The S series adopts barometric altimetry technology, which needs to be calibrated when accurately reaching absolute altitude.
1. In the home screen of the device, press the [Setting] button to enter the interface of setting.
2. Please press the [▲][▼] button to move to the option of "Parm. Setting",and press the [Enter] button to enter.
3. After entering the interface of "Parm. Setting", select "ASL Calibration" and enter.
4. After entering the interface of "ASL Calibration" and adjust the actual height by pressing the [▲][▼] button with reference to the known height.
5. Please press the [Enter] button to exit after setting.
HDOP Setting
Limit the inability to measure when the accuracy factor is higher than this value.
1. In the home screen of the device, press the [Setting] button to enter the interface of setting.
2. Please press the [▲][▼] button to move to the option of "Parm. Setting",and press the [Enter] button to enter "System Setting".
3. After entering the interface of "System Setting", press the [Enter] button to select "HDOP Limit" and enter.
4. After entering the interface of "HDOP Limit", press the [▲][▼] button to adjust the value of the accuracy factor.
5. Please press the "Start" button to exit after adjusting.
