Active Member
|
[China]
Address: Floor 4, NO.25-29,Power Station Road, Xihu , Shilong Town , Dongguan 523325, China.
Contact name:Amy
Guangdong Uchi Technology Co.,Ltd |
|
|
OBV10-I-15
Surge protectors OBV10-I-15 meet the type 1 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvoltages of all types and are available in single-pole to four-pole versions.The voltage-limiting,high-performance spark gaps provide several benefits.A short response time, a low protection level and high current leakage capability with long service life.
Technical Parameters
| Model: OBV10-I-15-Pluggable | |||
| Maximum continuous operating voltage | Uc | V | 255/275/320/385 |
| SPD to EN 61643-11 | Type 1 | ||
| SPD to IEC 61643-1 | class I | ||
| LPZ | 0→2 | ||
| Lightning impulse current (10/350μs) | Iimp | kA | 15 |
| Lightning impulse current (10/350μs) [total] | kA | 60 | |
| Nominal discharge surge current (8/20μs) | In | kA | 60 |
| Maximum discharge surge current (8/20μs) | Imax | kA | 100 |
| Voltage protection level | Up | kV | 2,5 |
| Response time | tA | ns | <25 |
| Follow current quenching capacity Ipeak | Ifi peak | kA | 12.5 |
| Maximum back-up fuse | A | 315 | |
| Temperature range | ϑ | °C | -40℃~+85℃ |
| Protection rating | IP 20 | ||
| Connection cross-section, rigid | mm² | 10-50 | |
| Connection cross-section, multi-wire | mm² | 10-35 | |
| Connection cross-section, flexible | mm² | 10-25 | |
Feature
Application
●AC/DC distribution
●Power supplies
●Industrial automation
●Telecommunications
●Motor controls systems
●PLC applications
●Power transfer equipment
●HVAC applications
● AC drives
●UPS systems
●Security systems
●IT/Data centers
Others
Technology SPD parameter(Note:According to user requirement ,can be
customized Uc=140V,440V,550V,voltage range of range of the SPD):
| Type No. | Rated Voltage(V) Un | Continuous Voltage Uc(V~) | Standard Discharge Current In(KA) | Max Discharge Current | Protection Level(KA~) | Response Time(ns) |
| DGM1(2)-D5 | 220/380 | 275/320 | 5 | 10 | 1.2 | ≤25 |
| DGM1(2)-D10 | 10 | 2 | 1.6 | |||
| DGM1(2)-C20 | 20 | 40 | 1.8 | |||
| DGM13-B30 | 30 | 60 | .2.2 | |||
| DGM3(4)-B40 | 10 | 80 | 2.4 | |||
| DGM(4)-B60 | 60 | 100 | 2.8 | |||
| DGM-N-PE | 220/255 | 40/60 | 60/80 | 1.2 | ≤100 |
Tip1: Lightning protection is probabilistic protection, and we cannot provide 100% protection.
First, lightning discharge itself has a certain degree of
randomness, and lightning parameters have certain statistical
properties, which determines that all protective measures based on
these statistical characteristics of lightning parameters cannot
provide 100% protection. Such as: direct lightning
protection-shielding characteristics; lightning current amplitude,
waveform, etc. have statistical properties;
Second, the lightning protection equipment cannot prevent the
formation of lightning flashes;
Third, lightning protection devices cannot ideally eliminate all
interference voltages/currents. The fundamental purpose of taking
protective measures is to ensure that most of the energy caused by
interference does not spread to the vulnerable parts of the device
and the staff.
Finally, the cost of protection against high-level surges with a
small probability of occurrence has risen sharply.
Tip2:How can we distinguish the quality of the lightning arrester?
1. It can be seen from the reaction time: determine whether the
lightning arrester can respond in time and quickly discharge the
lightning current.
2. It can be seen from the insertion loss: this refers to the
installation of a lightning protector, the impact of this lightning
protector on the line, the smaller the better
3. It can be seen from the number of impact resistance: determines
the service life of the lightning arrester. Generally, the gas
discharge tube will not drop after being placed for a period of
time. If you want to check its quality, you can use an adjustable
high-voltage DC power supply to test .
Q: Can I get some samples?
A: Yes, Sample orders welcomed.
Q: Can I use my own Logo or design on goods?
A: Yes, Customized logo and design on mass production are
available.
Q:What is the delivery time?
A: 3 days for samples, 7-15 days for mass production.
Q: What is the payment term?
A: T/T, L/C at sight, West union , Paypal, etc.
