Home Companies Guangdong Uchi Technology Co.,Ltd

High Capacity MOV Surge Protection Class 2 275V For Satellite TV

Active Member

Contact Us

[China]

Address: Floor 4, NO.25-29,Power Station Road, Xihu , Shilong Town , Dongguan 523325, China.

Contact name:Amy

Guangdong Uchi Technology Co.,Ltd

High Capacity MOV Surge Protection Class 2 275V For Satellite TV

Country/Region	china
City & Province	dongguan
Categories	Solar Chargers

Product Details

High Arresting Capacity MOV Surge Protection ,MOV Surge Arrestor With Imax 40KA

The surge arrestors OBV1-C40 meet the type 2 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvoltages of all types and are available in single-pole to four-pole versions. The use of high-performance varistors permits a rapid response time and a low protection level, without any line follow current. If circumstances are uncertain and there is a risk of fire from an overload, the internal cut-off unit disconnects the arrestor from the mains if necessary. In addition, the QR code printed on the arrestor allows disary. In addition, the QR code printed on the arrestor allows direct access to the online installation instructions.

Technical Parameters

Model: OBV1-C40
Maximum continuous voltage AC	Uc	V	275/320/385/440
SPD to EN 61643-11			Type 2
SPD to IEC 61643-1			class II
Nominal discharge current (8/20µs)	In	kA	20
Maximum discharge current (8/20µs)	Imax	kA	40
Voltage protection level	Up	kV	<1,3/1,5/1,8/2,0
Response time	tA	ns	<25
Maximum back-up fuse		A	125
Temperature range	ϑ	°C	-40℃~+85℃
Protection rating			IP 20
Max. cable cross-section flexible (fine-wire)		mm²	25
Max. cable cross-section rigid (single wire/multi-wire)		mm²	35

Feature:

1,Protect electric system and on-loading electrical apparatus from thunder and instantaneous over-voltage.
2,Protect transmission of Ethernet signals with 48V DC / 34V AC power supply circuits against
lightning induced surges.
3,Enhanced surge protection.
4,For mounting on 35mm DIN rails acc. to EN 60715
5,It can effectively ensure the equipments work properly

Application:

• SPDs for CCTV is mainly used for supervisory control system, preventing product from lightning

strike and surge.

• Protect the video equipment effectively and ensure the image can display normally5.Inhibit the

overvoltage pulse issue fromthe transmission line on the camera effectively, Avoiding the video

surveillance equipment damage due to overvoltage pulse.

• Offer surge protection for almost any products application in power, instrumentations and controls,

network and data lines, coax and etc.

• For Radio Antennas, GPS Antennas, CATV, CCTV and Satellite TV.

Advantage:

• Lower Prices

• Low Capacitance

• High Discharge Current

• Continuous and repeated protection in intense environment

Technology SPD parameter(Note:According to user requirement ,can be customized Uc=140V,440V,550V,voltage range of range of the SPD):

Type No.	Rated Voltage(V) Un	Continuous Voltage Uc(V~)	Standard Discharge Current In(KA)	Max Discharge Current Imax(KA)	Protection Level(KA~)	Response Time(ns)
DGM1(2)-D5	220/380	275/320 385/420	5	10	1.2	≤25
DGM1(2)-D10			10	2	1.6
DGM1(2)-C20			20	40	1.8
DGM13-B30			30	60	.2.2
DGM3(4)-B40			10	80	2.4
DGM(4)-B60			60	100	2.8
DGM-N-PE		220/255	40/60	60/80	1.2	≤100

FAQ

Q: Can I get some samples?
A: Yes, Sample orders welcomed.

Q: Can I use my own Logo or design on goods?
A: Yes, Customized logo and design on mass production are available.

Q:What is the delivery time?
A: 3 days for samples, 7-15 days for mass production.

Q: What is the payment term?
A: T/T, L/C at sight, West union , Paypal, etc.