Ethernet RJ45 Port Sure Protective Device Networking Surge
Protector
Ethernet RJ45 Port Sure Protective Device Networking Surge
Protector About this item:
• BRRJ45H-8L SPD is specially designed to avoid failures in data
transfer between equipment inside the same network.
• Over voltage protection equipment
• It protects the input of the electronic circuits of the network
cards against harms due to transient currents.
• To protect equipment from induced over-voltage, operating
overvoltage and caused by the electrostatic discharge damage.
• BRRJ45H-8L is a protector with RJ45 input and output connectors,
with a withstanding current up to 5kA for line.
• Flow capacity is big, fast response
• It’s designed to protect individually equipment connected to the
computers network.
Ethernet RJ45 Port Sure Protective Device Networking Surge
Protector Product Details:
| BRRJ45H-8L |
Test standards | IEC61643-21 |
Nominal voltage
Un | 5V |
Max.continuous operating d.c.voltage
Uc | 6V |
Max.continuous operating a.c.voltage
Uc | 4V |
Nominal current
IL | 0.5A |
C2 Nominal discharge current (8/20us) per line
In | 5kA |
Voltage protection level [line-line]
Up | ≤30V |
Voltage protection level [line-PG]
Up | ≤500V |
Response time [line-line]
tA | ≤1ns |
Response time [line-PG]
tA | ≤100ns |
Operating temperature range
Tu | -40℃…+80℃ |
Connection (input/output) | RJ45 socket 8line |
Bandwidth | 300 Mbps
|
Insertion Loss | ≤0.3dB |
Enclosure material | aluminium alloy |
Degree of protection | IP20 |
Dimension:
Ethernet RJ45 Port Sure Protective Device Networking Surge
Protector Main features:
• Using multilevel protection circuit, low residual.
• Network surge protective device suits for network equipment,
telecommunications, router, HUB, MODEM etc.
• Ground through special craft processing, to avoid interference.
• Sensitive communication network equipment, to protect from
lightning overvoltage and induced overvoltage, electrostatic
discharge caused by damage.
• Low residue, small volume, convenient installation.
Ethernet RJ45 Port Sure Protective Device Networking Surge
Protector Installation:
• It should be properly grounded to work. The Ethernet ground wire
(11 Inch - 12 AWG) on the surge protector needs to be connected to ground through the shortest
path.
• The Line-to-Line Ethernet surge protection mode helps protect
against short circuits between different nodes of the network system while the Line-to-Ground mode protects
against short circuits between the network node and the earth.
Company information:
Wenzhou Britec Electric Co., Ltd. was established in 2003, is a
professional surge protective devices (SPD) manufacture with many
years experiences.We are providing quality products, competitive
price, prompt delivery and excellent service, and looking forward
to even greater cooperation with overseas trade based on mutual
benefits.
Certificate:
Payment & Shipping:
FAQ:
Q1: What is your terms of payment?
A1: T/T, Paypal etc.
Q2: What is your terms of delivery?
A2: EXW, FOB, CIF, CNF.
Q3: How about your delivery time?
A3: Generally, it will take 15 to 30 days after receiving your
advance payment. The specific delivery time depends on the items
and the quantity of your order.
Q4: Can you produce according to the samples?
A4: Yes, we can produce by your samples or technical drawings.
Q5: Is samples available?
A5: Samples are available, but it is not free.