RJ45 surge protector Ethernet Signal Surge Protection OEM/ODM 6V
RJ45 surge protector Ethernet Signal Surge Protection Product
description:
• Specially designed to protect network devices.
• Used to prevent indirect lightning or direct lightning impact and
network over-voltage damage to signal equipment.
• Surge protective devices use RJ45 interface.
• BR-RJ45 series signal surge protector (hereinafter referred to as
SPD) is suitable for computer networks (Ethernet, LAN, token ring),
servers, routers, Hub, broadband.
• Designed according to IEC 61643-21
RJ45 surge protector Ethernet Signal Surge Protection Product Details:
| BRRJ45L-4L |
Test standards | IEC61643-21 |
Nominal voltage
Un | 5V |
Max.continuous operating d.c.voltage
Uc | 6V |
Max.continuous operating a.c.voltage
Uc | 4V |
Nominal current
IL | 0.5A |
C2 Nominal discharge current (8/20us) per line
In | 5kA |
Voltage protection level [line-line]
Up | ≤30V |
Voltage protection level [line-PG]
Up | ≤500V |
Response time [line-line]
tA | ≤1ns |
Response time [line-PG]
tA | ≤100ns |
Operating temperature range
Tu | -40℃…+80℃ |
Connection (input/output) | RJ45 socket |
Bandwidth | 30 Mbps / 100 Mbps / 300
Mbps |
Insertion Loss | ≤0.3dB |
Enclosure material | aluminium alloy |
Degree of protection | IP20 |
Dimension:
RJ45 surge protector Ethernet Signal Surge Protection Main
character:
1. For protecting network devices.
2. BR-RJ45 SPDs are specially designed to avoid failures in data
transfer between equipment inside the same network.
3. Good discharge capacity, low voltage protection level
4. It protects the input of the electronic circuits of the network
cards against harms due to transient currents.
5. Quick response, high transmission speed, low signal attenuation
6. BR-RJ45 is a protector with RJ45 input and output connectors,
with a withstanding current up to 5kA for line.
7. Metallic housing RJ45 connection, easy for installation
8. It’s designed to protect equipment connected to the computers
network.
9. Optional with DIN rail installation
RJ45 surge protector Ethernet Signal Surge Protection Installation:
• It should be properly grounded to work. The Ethernet ground wire
(11 Inch - 12 AWG) on the surge protector needs to be connected to ground through the shortest
path.
• The Line-to-Line Ethernet surge protection mode helps protect
against short circuits between different nodes of the network system while the Line-to-Ground mode protects
against short circuits between the network node and the earth.
Company information:
Wenzhou Britec Electric Co., Ltd. was established in 2003, is a
professional surge protective devices (SPD) manufacture with many
years experiences.We are providing quality products, competitive
price, prompt delivery and excellent service, and looking forward
to even greater cooperation with overseas trade based on mutual
benefits.
Certificate:
Payment & Shipping:
FAQ:
Q1: What is your terms of payment?
A1: T/T, Paypal etc.
Q2: What is your terms of delivery?
A2: EXW, FOB, CIF, CNF.
Q3: How about your delivery time?
A3: Generally, it will take 15 to 30 days after receiving your
advance payment. The specific delivery time depends on the items
and the quantity of your order.
Q4: Can you produce according to the samples?
A4: Yes, we can produce by your samples or technical drawings.
Q5: Is samples available?
A5: Samples are available, but it is not free.