Home Companies Britec Electric Co., Ltd.

Pluggable 2 Pole 600V Solar Surge Arrester For Solar Inverter

Contact Us

[China]

Trade Verify

Address: Block 1 , BoTongHuiGu industrial Park, Yueqing, Zhejiang ,China 325600

Contact name:Macy Jin

Britec Electric Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Pluggable 2 Pole 600V Solar Surge Arrester For Solar Inverter

Country/Region	china
City & Province	zhejiang
Categories	Workplace Safety Supplies

Product Details

2 Pole Surge Protection Devices 600V Power Surge Protector DC Surge Protective for Solar Photovoltaic Applications

2 Pole Surge Protection Devices 600V Power Surge Protector Description:

• BRPV2 PV Surge Protective Device 40KA DC SPD suitable for the new energy wind power generation system, its working voltage covers 500V, 600V, 800V and 1000V.

• Pluggable Surge Arresters Type 2 for Photovoltaic applications to prevent the risks linked to lightning, compliant with IEC61643-31.

• It is installed in the main power system at DC circuit, to protect against the indirect lighting current, direct lighting current or other instantaneous over voltage.

2 Pole Surge Protection Devices 600V Power Surge Protector Parameters:

	BRPV2 600
SPD classification according to EN61643-31	Type 2
SPD classification according to IEC61643-31	Class II
Max. continuous operating dc voltage Ucpv	600V
Nominal discharge current (8/20us) In	20kA
Max. discharge current (8/20us) Imax	40kA
Voltage protection level Up	≤2.6kV
Response time tA	≤25ns
Operating temperature range Tu	-40℃-80℃
Operating state / fault indication	green / red
Cross-section area (Min.)	4mm²
Cross-section area (Max.)	35mm²
For mounting on	35mm Din rail
Enclosure material	Thermal plastic UL94-V0
Degree of protection	IP20
Order Code	B8013
Order code(With remote signal)	B8015

Technology characteristic:

2 Pole Surge Protection Devices 600V Power Surge Protector Features:

a. Module design, convenient installation, with easy electric maintains operation.

b. Type 2 surge protector for DC power system

c. Built-in over current and over heat, temperature control open circuit technology.

d. Imax - 40kA/pole (8/20 waveform)

e. Adopt independent intelligence property right and high performance sensitivity resistance plates.

f. High energy anti-surge components MOV

g. Small creepage current, fast response time, remnant low voltage.

h. Failure status indicator, green/red

i. With remote connection, can realize remote control

2 Pole Surge Protection Devices 600V Power Surge Protector Installation Notes:

• Installation must be performed only by electrically skilled operator.

• Disconnect power before installing, no hot-line operation is allowed, and better to under the guidance of professional electrician.

• For best performance, mount protector in parallel with the equipment it is protecting as close as possible. (*Note: If protector is to be located outdoors and exposed to elements, mount protector inside a suitable weatherproof enclosure.)

• Green tab, normal work status, Red tab, failure status, need to be replaced rapidly.

Our Services:

• 17 years global leading profession manufacture of electrical products surge arrester.
• All products will be well packed before shipping.
• Standard packaging, and you can also tell us your own requirements on packaging.
• Faster delivery.
• Individually Tested Prior to Shipment.
Why need pv surge arrester?

Most of the solar modules are very regularly exposed to lightnings and overvoltages, where lighting occurrences are frequent, unprotected PV systems can suffer repeated and significant damage to key components. And these systems represent a significant investment cost, system downtime and the loss of revenue. PV modules, DC cabling, inverters, AC cabling, as well as monitoring systems must all be protecting as part of a in all-inclusive effort to mitigate the damaging effects of lightning and surges. The use of adapted surge protections is then highly recommended.
Certifications:

Company profile:
Wenzhou Britec Electric Co., Ltd. is a professional SPD manufacturer, located in Yueqing, Zhejiang, China, Britec is the specialized manufacturer of low voltage surge protection device. With the advanced facility and technology, we make the first-grade products for our customs. At present, Britec has export and import rights, and our products has been sold to more than 50 countries in the world.

Shipping:

FAQ:

Q: Are you Trading Company or Manufacturing Factory?
A: we are a professional manufacture with 17 years production experience and 15 years export experience.
Q: I am interested in your products, could I get sample?
A: We are glad to offer samples.
Q: How about the Delivery time?
A: It is aboout 20 days.
Q: How can you guarantee the product quality?
A: We have the quality control system, and it's been followed strictly. All product will be inspected before packing for double checking, no matter where our product deliver to, we will be responsible for its quality, customer's satisfaction is very important for us, it matters whether we have next order.

Q: I'd like to know your Payment terms.
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance, balance before shippment. About other payment terms, let's make a specific negotiation according to our order situation.