UNS N08810 1.4958 Incoloy Alloy Incoloy 800H Nickel Based Alloy
Seamless Pipe
Incoloy 800H nickel based alloy seamless pipe UNS N08810 1.4958
Material designation: Incoloy 800H nickel based alloy
US grade: NO8810
German grade: X2NiCrAlTi3220
Incoloy 800H (NO8810) nickel-based alloy overview:
Incoloy 800H (NO8810) nickel based alloy alloys usually have a Cr
content of 15-25%, a nickel content of 30-45%, and a small amount
of aluminum and titanium. Compared with Incoloy 800 alloy, the
carbon content is controlled from less than or equal to 0.1% to
0.05-0.1%, which improves the strength of steel better.
The alloy has a high chromium content and a sufficient nickel
content, so it has a high resistance to high temperature corrosion
and is widely used in industry. It has excellent resistance to
stress corrosion cracking in chloride, low concentration NaOH
aqueous solution and high temperature and high pressure water, so
it is used to make equipment resistant to stress corrosion
cracking. The corrosion resistance is better than general
austenitic stainless steel, and also better than Inconel 600 alloy.
In manufacturing corrosion-resistant stress cracking equipment, it
is also better than Inconel 600 and Monel 400 alloy.
Chemical composition of Incoloy 800H (NO8810) nickel based alloy:
see Table-1:
Table-1
%
C≤ | Si≤ | Mn≤ | P≤ | S≤ | Cr≥ | Ni≥ | Mo≥ | Cu≤ | 0.05-0.10 | 1.00 | 1.50 | 0.020 | 0.015 | 19.0-23.0 | 30.0-35.0 | - | 0.75 | Other | N≤ | Al≤ | Ti≤ | Fe≤ | Co≤ | V≤ | W≤ | Nb≤ | - | 0.15-0.60 | 0.15-0.60 | 1.00 | - | | - | - |
|
|
specification:
Outer diameter Φ6—762mm; wall thickness: 0.5-50mm, maximum length
18000mm
Special specifications are available upon negotiation.