Active Member
|
[China]
Address: NO.161 XingFei Road ,Songjiang Disrict,Shanghai 201601, P.R.CHINA
Contact name:michael
Shanghai Aboom Metal prodcut co.,ltd |
|
|
Cold Super Duplex Pipe Fittings F53 / S32750 90 Degree Long Radius Elbow
90 degree long radius elbow Super Duplex Pipe Fittings F53 / S32750
Pren ≥40.0
SAF 2507 (UNS S32750) 25% chromium duplex stainless steel
Material:F53 / S32750 Super Duplex Stainless Steel
National standards:
| ASTM / ASME: A240-UNS S32750 |
| EURONORM: 1.4410-X2 Cr Ni MoN 25.7.4 |
| AFNOR: Z3 CN 25.06 Az |
| DIN / EN 1.4410, ASME SA-240 |
Size:
| Outer diameter of seamless elbow: 1/2 "－20" (DN15－DN500) |
| Outer diameter of slotted elbow: 1/2 "－48" (DN15－DN1200) |
| Wall thickness: Sch5S-SchXXS |
Production standards: GB / T12459, GB / T13401, SH3408, SH3409; ASME / ANSI B16.9,
B16.28,
ASTM A403, MSS SP-43; DIN 2605, DIN2609, DIN2615, DIN2616;
JIS B2311, JIS B2312, JIS B2313
General attributes:
S32750 Super Duplex stainless steel pipe has strong strength and corrosion resistance, and is mainly used in chemical processing, petrochemical and subsea equipment. It has strong resistance to chloride corrosion, higher thermal conductivity and lower coefficient of thermal expansion. Higher chromium, molybdenum and nitrogen content it has a high resistance to pitting, crevice corrosion and general corrosion.
Its impact strength is also very high. The S32750 alloy is not suitable for use at temperatures higher than 570 ° C. If it is exposed to such an environment for a long time, its toughness will decrease. Its chemical composition is shown below
| Grade | C≤ | Mn≤ | Si≤ | S≤ | P≤ | Cr | Ni | Mo | Cu≤ | N |
| S32750(SAF2507) | 0.03 | 1.2 | 0.8 | 0.02 | 0.035 | 24 / 26 | 6.0 / 8.0 | 3.0 / 5.0 | 0.5 | 0.24/0.32 |
| S31803(SAF2205) | 0.03 | 2.0 | 1.0 | 0.02 | 0.03 | 21 / 23 | 4.5 / 6.5 | 2.5 / 3.5 | 0.08 / 0.20 | |
| S31500(3RE60) | 0.03 | 1.2 / 2.0 | 1.4 / 2.0 | 0.03 | 0.03 | 18 / 19 | 4.25 / 5.25 | 2.5 / 3.0 | 0.05 / 0.10 |
Mechanical properties Tensile strength: σb≥730Mpa Elongation: δ≥15%
Typical working conditions :30% dilute sulfuric acid, below 60 ℃, annual corrosion rate
<0.1mm
SHANGHAI ABOOM METAL PRODUCT CO.,LTD
Address:ROOM 412,NO.452 CHEFENG ROAD,
SongjiangDistrict , Shanghai ,201601,P.R.China
