Professional Manufacturer Diesel Power Pack quarry hydraulic splitter

Contact: Lucy

Tel: +86 713 8906693

Whatsapp/Phone:+86 18186993613

E-mail: sales@superdrill.com.cn

Address: Building 3, Rainbow road,No.188 ; wuhan ;Hubei province

The hydraulic rock splitter is a kind of hand-hold splitting and demolition tool.It can controllably split rock or concrete.Especially suit for cabined area where large machine can not work.Such as hydraulic breaker and place where is strictly limited of noise,dust,flying debris,shake,exhaust gas,also widely use in the place where need non-explosive and blast forbidden.

Phase 1, First, a hole of a precise diameter and depth is drilled into the material. The wedge set (one wedge and two counter wedges) is inserted into the drill-hole.

Phase 2, The wedge is driven forward under hydraulic pressure, forcing the counter wedges apart with a force of up to 450 tons. The material splits within seconds.

Phase 3, With enlarging counter wedges the split can be expanded to its maximum width. Reinforcing rods break or can be cut up with a suitable power tool.

Controlled Demolition for Infrastructure Work
Many contractors find they can reduce costs, save time and make demolition work profitable using the hydraulic splitting method. Hydraulic splitting means controlled demolition. As the direction of breaks can be determined, concrete can be cut in sections as large as your equipment can handle. Hydraulic splitting eliminates both shocks and vibrations associated with large impact tools. Engineered for heavy duty work, hydraulic splitters will out perform even large mounted impact machines. It can break large pieces of concrete or rock many times faster than paving breakers. Years of research and the use of hydraulic splitting on hundreds of job sites has proved this new method to be one of the most practical tools for demolition of concrete and rock. With a hydraulic splitter, the operator now has a very powerful tool at his command. With little effort, he can control the demolition as the job requires. The applications for the splitter are many, such as bridge decks, abutments, retaining walls, concrete walls, floor slabs, foundations, wall openings, reinforced concrete, rock and brick walls, locks, dams, culverts, road barriers and underwater demolition of concrete and rock.

How Splitting Works The hydraulic splitter is powered by a 10,000 P.S.I. pump. The cylinder contains a control valve and a piston that moves the plug between the two feathers forcing them against the wall of the hole. When the tension increases beyond the tensile strength of the material, a split will occur. The entire operation of the cylinder is controlled by a single lever on top of the tool. The plug can be advanced and retracted with this lever. An automatic built-in valve reduces pressure after break. *Two or more hydraulic splitters can be operated at one time increasing the breaking. Example,two cylinders produce 1,400,000 lbs. of breaking force. Up to four splitters can be operated with one pump.

A hydraulic splitter was used to remove ends of overpass supports to form a keyway. The concrete was separated wide enough to cut reinforcing rods using enlarging feathers.	A workman carries splitter used to cut 14 ft. tunnel through base of dam for new penstock.	Trench rock and boulders below grade can be broken with one or more hydraulic splitters. Hydraulic splitting eliminates dangers associated with blasting. These hydraulic splitters will also operate underwater without any modifications.

hydraulic splitter---Hydraulic pump station

hydraulic splitter---Hydraulic pump station

hydraulic splitter---Splitting gun and wedge

hydraulic splitter---Exhibition plan

Packing & Delivery

Superdrill Equipment Co.,Ltd , an professional manufacturer of various Rock Drills,quarrying & mining tools for natural dimensional stone quarrying, mining and construction.
Our products include:

Top hammer drilling tools (R25-R28, R32, R35 T38,T45,T51,GT60);Extension Rod ;Coupling and Shank adaptors.API standard series drilling pipesHigh, Medium and Low air pressure DTH hammers and bits,( 2'' ~ 24''): DHD,COP,Mission,QL,SD,Numa series; Overburden Casing system ( Concentric & Symmetric casing sytem, Odex Casing System), Double Casing System and Reverse Circulation System Etc.

Our products can be perfectly matched with the world famous brand such as Atlas Copco, Sandvik, Ingersoll-Rand and other well-known manufacturers’ products.

Our company has introduced the most advanced manufacturing equipments and technology in this area and has established an integrated production system. Electro-hydraulic forging hammers for forging process, Italian atmosphere-controllable sealed quench furnace for heat treatment, CNC machines for accurate finishing and experienced workers in metal machining all contribute to the good performance of our products. Till now, we have fulfilled the purpose of all parts being finished precisely and key processes being controlled numerically. Meanwhile, we have been awarded of varies of technology and products patents which ensure the high quality and reliability of our products.