|
[China]
Trade Verify
Address: NO.13-17 3rd Floor, Office Building 2, H District, Liyuan Metal Trading Center, Chencun Town, Shunde District, Foshan, Guangdong Province, China
Contact name:Frankie
Guangdong Grand Metal Material Co., Ltd |
|
Verified Suppliers
|
|
|
| Product Information | |
| Product Name | China Original Factory Inner Decoration Hotel Elevator Panels 316 1.0mm Etched PVD Stainless Steel Decorative Sheets |
| Grade | Stainless Steel 201,304,316,etc. |
| Color | Gold, Rose Gold, Champagne Gold, Black, Wine Red, Rose Red, Violet, Emerald Green, Bronze, Red Copper, Sapphire Blue, Silver, etc.; Color Fastness for More Than 20 Years |
| Size | 1000×2000;1220×2440;1500×3000;1220×3050; or Customized by Customer Thickness: 0.3mm-3mm |
| Technology | 2b, BA, No.4, 8k, Hairline, Embossed, Etched, Vibration, PVD color Coated, Sand Blasted, Anti-fingerprint, Stamped, Satin Finish, Perforated, etc. |
| Samples | Free Sample, Freight Paid by Customers |
| Feature | 1.Anti-rust,Oxidation-resistant, Anti-scar, Non Fading, Waterproof
, Corrosion-resistant 2.Eco-friendly, No Pollution, Durable and Strong |
| Usage | 1.Indoor and Outdoor Decoration Specially for Star Rated Hotel,
Restaurant, Office, Bar, Club, KTV, Villa 2. Engineering Decoration 3. Wall and Ceiling Decoration |
| payment | TT 30% before production, 70% before shipment |
How to fill the stainless steel plate after etching?
Many people think that the stainless steel etched plate is etched after being plated, but it is not. Many technologies now make stainless steel plates etched first and then colored.
Etched wood grain board
How to fill in the color after the stainless steel is etched?
According to the surrounding color, you can slant the gray of the
surrounding color, generally, the blue-gray is enough, add 20-30
black, and other ambient colors do not exceed 10.
Toning refers to changing a specific tone to form another tone picture with a different feeling. Toning is a technique that is most likely to confuse everyone and is very difficult to grasp in practice. Let many enthusiasts go around to discuss tutorials, and spend a lot of energy and time on color testing.
Color stainless steel plate is to use vacuum coating technology to evenly cover titanium or chromium metal on the surface of stainless steel plate, and produce different colors. The principle of vacuum coating technology is to use low-voltage, high-current arc discharge technology under vacuum conditions, use gas discharge to evaporate the target and ionize the evaporated material, and under the action of an electric field, make the evaporated material or its reaction. The product is deposited on the plate.
A variety of decorative color plates
At the same time, the following matters should be paid attention to
in the stainless steel products coated with color PVD film:
1. Although the vacuum-plated PVD film has certain corrosion resistance, it is still difficult to resist the contact of strong corrosive substances such as acid and alkali. Therefore, in the usual maintenance, try not to use cleaning agents that contain strong acids and alkalis or have strong decontamination capabilities, such as toilet cleaners, paint strippers, metal cleaning agents, etc. You can use industrial alcohol to gently wipe with a soft cotton cloth. Dirt should also be treated with weak acid and weak base solvents. In addition, if exposed to harsh environments for a long time, or in contact with corrosive liquids for a long time, the PVD film layer is also prone to problems such as falling off, such as swimming pools (containing fluorine), seawater (containing a lot of salt), high temperature and high humidity (steam) etc. environment.
Various pattern etching plates
2. The use of anti-fingerprint varnish. More and more customers
choose to spray a layer of transparent anti-fingerprint clear oil
on the stainless steel products plated with color PVD film, the
effect is obvious, there is no fingerprint on the hand, easy to
clean, and it can also increase wear resistance and resistance. The
function of corrosion can serve multiple purposes. However, the
disadvantage is that the color of the injected and uninjected is
inconsistent, and the processing requirements are high and the cost
is not low, which affects the metal texture of the product, and
there are problems such as aging. Therefore, it must be carefully
considered before use.
