Description of hydraulic pump in general use:
The hydraulic pump's power source is artificial power. The one-way
manual oil pump is a small hydraulic pump which can convert manual
mechanical energy into hydraulic energy. Various construction such
as lifting, bending, straightening, shearing, assembly,
disassembly, and some other civil construction and military
construction can be operated by using distribution cylinder and
specific tools. Hydraulic pump for general use are manual power, high pressure,
ultra-small, portable, easy to operate and widely used. No sparks during operation, suitable for flammable and
easy-explosive situation.
- Can be connected to any hydraulic tool;
- A wide range of uses;
- By using aviation hydraulic oil, working ambient temperauture
between -30oc-55oc are supported
- Noiseless operation
Brief introduction of Marine turbocharger:
When the diesel-exhaust turbocharger combination is in operation,
the marine turbocharger/exhaust gas turbocharger is prone to
failures such as turbine casing corrosion, bearing damage, blade
damage, gas seal damage, and supercharger vibration. The daily good
maintenance management can reduce these failures.
Heavy duty Electronic Gear pump 10 l/min and 3,5 bar. Integrated
Smart Keypad to reverse the flow direction and to manually fine
tune the flow rate; the flow rate is also automatically adjusted
according to the viscosity of the fluid to avoid cavitation. Best
for oil and diesel transferring. Compact and Easy to operate and
carry.
Lubricating oil pumps should be checked every 16,000 running hours.
Overhauling the oil pumps requires special equipment. During this
process casings, covers, suction pipes and pump nut are completely
dismantled, cleaned and checked for mechanical damage and cracks .
All measurements of the shaft, the pinion and the bores of the
casing need to be checked if they are within tolerance.
The oil pump is tested at several speed ranges for vibration and to
check if the oil pump is delivering the required pressure at the
correct speed after reassembly.
Uniturbin is also able to supply high- pressure oil pumps on direct
sale or on exchange base.