|
[China]
Trade Verify
Address: No.7, Lane 3, North of LianXi Village, Dongpu Town, Tianhe District, Guangzhou, China
Contact name:Alina
Guangzhou Suncar Seals Co., Ltd. |
|
Verified Suppliers
|
|
|
Blade Tilt Cylinder Seal Kit 707-99-34590 Komatsu Replacement Kits For D41P-6K Bulldozer
| Product Name | Komatsu Blade Tilt Cylinder Seal Kit |
| Model Number | KOMATSU D41E-6K, D41P-6K, D41PF-6K |
| Place of Origin | China(Mainland) |
| Brand name | SUNCAR |
| Packing | PP bag inside, carton box outside |
| Shipping Mode | By air, by sea, by express(Fedex, UPS, DHL, TNT, etc.) |
| Part Number | 707-99-34590 |
| Payment Terms | Western Union, L/C, T/T, Money Gram, D/A, D/P |
| CertifiC.A.Tion | ISO9001 |
| Condition | 100% New |
| Warranty | Unavailable |
| Customized | OEM & ODM are welcomed |
| AppliC.A.Tion | Komatsu bulldozer blade tilt cylinder |
| Preservation Notice | Closed, dry and avoid the sun |
| Quality | Original quality, high performance |
| Uses | Good oil resistance, wear resistance, and corrosion resistance |
| High Light | Hydraulic seal kits, cylinder seal kit |
Return Policy& Feedback:
(1) We accept return, but please contact us before make the decision.
(2) We only accept exchange if the item is received incorrect or defective.
(3) Return shipping costs are the responsibility of customers.
(4) All returns must be whole and complete as shipped to the customers.
(5) Our duty is to provide you high quality product and service, if you are satisfied with us, please leave us a positive feedback, it’s our power to make better.
Hydraulic Seal Installation Requirements:
1. The sealing surface of hydraulic seal gasket and flange should be clean.
2. The outer diameter of the hydraulic seal gasket should be smaller than the flange sealing surface, and the inner diameter should be slightly larger than the pipe inner diameter.
3. The pretension of the gasket shall not exceed the design requirements.
4. Torque wrenches are best used when packing asbestos gaskets.
5. When installing the gasket, tighten the nuts one by one.
6. In case of leakage, step-down treatment must be carried out after installation, and the sealing gasket must be replaced or adjusted.
Related Parts:
| Pos. | Part No. | Product Name | QYT. |
| 124-63-02223 | CYLINDER ASSEMBLY | 1 | |
| 1 | 124-63-64641 | • CYLINDER | 1 |
| 2 | 07137-04006 | • BUSHING | 1 |
| 3 | 04065-09030 | • RING,SNAP | 2 |
| 4 | 07000-13040 | • O-RING (KIT) | 2 |
| 5 | 707-29-11620 | • HEAD,CYLINDER | 1 |
| 6 | 707-52-90300 | • BUSHING | 1 |
| 7 | 707-51-55030 | • PACKING,ROD (KIT) | 1 |
| 8 | 707-51-55640 | • RING,BUFFER (KIT) | 1 |
| 9 | 707-56-55540 | • SEAL,DUST (KIT) | 1 |
| 10 | 07179-12069 | • RING,SNAP | 1 |
| 11 | 07000-12105 | • O-RING (KIT) | 1 |
| 12 | 07146-02106 | • RING,BACK-UP (KIT) | 1 |
| 13 | 07000-12110 | • O-RING (KIT) | 1 |
| 14 | 124-63-64621 | • ROD,PISTON | 1 |
| 15 | 07137-04006 | • BUSHING | 1 |
| 16 | 04065-09030 | • RING,SNAP | 2 |
| 17 | 07000-13040 | • O-RING (KIT) | 2 |
| 18 | 707-36-11100 | • PISTON | 1 |
| 19 | 707-44-11180 | • RING,PISTON (KIT) | 1 |
| 20 | 07156-01112 | • RING,WEAR (KIT) | 1 |
| 21 | 707-67-36010 | • NUT | 1 |
| 707-99-34590 | SERVICE KIT | 1 |
Product Show:
