Puyang Zhongshi Group Co., Ltd. |
Verified Suppliers
|
|
Thin Walled Barrel RW Series Oil Downhole Pumps
RW series oil well downhole pump description:
If the sucker rod downhole pump appeared quality problem, need not put forward the tubing string, only need put the whole pump forward well through the sucker rod string together , operation is simple.
Long plunger and antisand sticking pump is improved based on the
long plunger tubing pump by adding a sand setting tube and a joint,
thus preventing the pump from being stuck by sand.
Long plunger and anti-sand sticking pump can be used in the wells
of sand content about 0.8%, and consists of a barrel assembly, a
plunger assembly and a sand control assembly.
The pump has long plunger and short barrel so that the plunger
seals the barrel all the time.
Because of the special heat treatment towards the inside surface of
the barrel, it is much better than the standard barrel in
anti-wear and anticorrosion capacity.
RW series downhole pump technical parameter table:
RWAM model | Pump diameter (in) | Barrel length (ft) | Plunger length (ft) | Stroke length (ft) | Extension length (ft) | Tubing size EUE(in) |
30-250RWAM | Ø63.5 | 2.1-10 | 0.3-8.0 | 1.2-9.0 | / | 3-1/2” |
30-250RWBM | ||||||
30-250RWAC | Ø63.5 | 3-1/2" | ||||
30-250RWBC |
Features:
1. The thin wall barrel pump has top anchor and bottom anchor
2. Stationary barrel
3. Chrome plated barrel
Delivery photo for downhole pumps: