|
[China]
Trade Verify
Address: Room2212, B Building, Tiandi Times Square, Weiyang District, Xi'an City, Shaanxi P.R., China
Contact name:Liza
Puyang Zhongshi Group Co., Ltd. |
|
Verified Suppliers
|
|
|
All Sizes 3/4"- 1 1/4" API 11B Oilfield Drilling Tool Hollow Sucker Rod Oil Well Grade Steel Sucker Pony Rods
Product Description:
Sucker rod is manufactured according to API Spec 11B standard which mainly includes grade D and K. Grade H sucker rod work with pcp pumps especially suitable for deep well. Zhongshi provide the sucker rods which have the D ,K, KD , HL, HY type sucker rod zhongshi have over the 20 years product experience .We also provide the rod accessories like rod couplings,polish rods, pony rods,sinker bars. Sucker Rods & Polished Rod Couplings Box by box API type T or spray metal couplings are available in pin sizes 5/8 through 1 1/8 in full size.
Sucker Rod Features:
1. Grade C sucker rod: Moderate strength, not susceptible to sulfide stress cracking, suitable in sour medium
2. Grade D sucker rod: Made of quality heat treated steel alloy, with high tensile and yield strength; suitable for non-corroding or mildly corroding environment.
3. Grade D 1 inch Oilfield hollow sucker rod for well drilling oil
gas producing
4. Grade K, KD sucker rod: With good corrosion resistance in H2S,
CO2 and NaCl media, superior tensile strength.
5. Grade HL and HY sucker rod: High strength; structure and size
matching with grade D sucker rod; withstanding 966-1, 136 MPa (140,
000-164, 720 psi); suitable for deep and large displacement wells
Sucker Rod Specification:
| Size in (mm) | Rod Body diameter in (mm) | Coupling OD mm (in) | Full size Coupling OD mm (in) | diameter of ext. thread in (mm) | Wrench square W*L mm (in) | Length series m (ft) |
| 1 (25) | 1 (25.40) | 50.8 (2) | 55.6(2.187) | 1-3/8 (34.93) | 33.3×38.1(1-5/16×1-1/2) | 2 (6), 3 (10) |
| 1-1/8 (28) | 1-1/8 (28.58) | 57.2 (2.25) | 60.33(2.375) | 1-9/16 (39.7) | 38.1×41.3 (1-1/2×1-5/8) | 2 (6), 3 (10) |
| 3/4 (19) | 3/4 (19.05) | 38.1 (1.5) | 41.28(1.625) | 1-1/16(26.99) | 25.4×31.8 (1×1-1/4) | 9.14 (30) |
| 5/8 (16) | 5/8 (15.88) | 31.8 (1.25) | 38.10(1.5) | 15/16 (23.81) | 22.2×31.8 (7/8×1-1/4) | 7.62 (25) |
| 7/8 (22) | 7/8 (22.23) | 41.3 (1.625) | 46.0(1.812) | 1-3/16 (30.16) | 25.4×31.8 (1×1-1/4) | 0.6 (2), 1 (3) |
Mechanical Properties of Sucker Rods:
| Grade | Min Yield strength 0.2% offset M Pa (psi) | Tensile strength M Pa (psi) | Elongation δ% | Reduction of area ψ% |
| K | 414 (60, 000) | 621-793(90, 000-115, 000) | ≥13 | ≥60 |
| C | 414 (60, 000) | 621-793(90, 000-115, 000) | ≥13 | ≥50 |
| D | 586 (84, 970) | 793-965 (114, 985-139, 925) | ≥10 | ≥50 |
| HL | 795(115,000) | 965-1,195(140,000-173,339) | ≥10 | ≥45 |
| KD | 590(85, 000) | 793-965 (114, 985-139, 925) | ≥10 | ≥50 |
| HY | 540 (78, 300) | 965-1,195(140,000-173,339) | ≥42 | ≥224 |
Chemical Composition Of Common Sucker Rod:
| AISI | C | Si | Mn | P | S | Cr | Ni | Mo | V | Cu | Al |
| 1541 | 0.36-0.45 | 0.15-0.35 | 1.35-1.65 | ≤0.04 | ≤0.04 | ≤0.3 | ≤0.35 | ≤0.06 | 0.04-0.09 | ≤0.35 | ≤0.035 |
| 4120 | 0.17-0.24 | 0.17-0.37 | 0.4-0.7 | ≤0.025 | ≤0.025 | 0.8-1.1 | ≤0.3 | 0.15-0.25 | / | ≤0.2 | / |
| 4130 | 0.26-0.33 | 0.17-0.37 | 0.4-0.7 | ≤0.025 | ≤0.025 | 0.8-1.1 | ≤0.3 | 0.15-0.25 | / | ≤0.2 | / |
| 4138 | 0.37-0.45 | 0.17-0.37 | 0.9-1.2 | ≤0.025 | ≤0.025 | 0.9-1.2 | ≤0.3 | 0.2-0.3 | / | ≤0.2 | / |
| 4138M | 0.37-0.45 | 0.17-0.37 | 0.9-1.2 | ≤0.025 | ≤0.025 | 0.9-1.2 | ≤0.3 | 0.2-0.3 | 0.04-0.09 | ≤0.2 | / |
| 4140 | 0.38-0.45 | 0.17-0.37 | 0.5-0.8 | ≤0.025 | ≤0.025 | 0.9-1.2 | ≤0.3 | 0.15-0.25 | 0.04-0.09 | ≤0.2 | / |
| 4142 | 0.38-0.45 | 0.17-0.37 | 0.5-0.8 | ≤0.025 | ≤0.025 | 0.9-1.2 | ≤0.3 | 0.15-0.25 | 0.04-0.09 | ≤0.2 | / |
| 3130 | 0.22-0.29 | 0.15-0.35 | 0.71-1.0 | ≤0.025 | ≤0.025 | 0.42-0.65 | 0.72-1.0 | 0.01-0.06 | / | ≤0.2 | / |
| 4320 | 0.18-0.42 | 0.15-0.35 | 0.8-1.0 | ≤0.025 | ≤0.025 | 0.7-0.9 | 1.15-1.5 | 0.2-0.3 | 0.04-0.09 | ≤0.35 | ≤0.035 |
| 4330 | 0.3-0.35 | 0.15-0.35 | 0.8-1.1 | ≤0.025 | ≤0.025 | 0.8-1.1 | 1.65-2.0 | 0.2-0.3 | 0.05-0.10 | ≤0.2 | / |
| 4621 | 0.18-0.23 | 0.17-0.37 | 0.7-0.9 | ≤0.025 | ≤0.025 | ≤0.35 | 1.65-2.0 | 0.2-0.3 | / | ≤0.2 | / |
| 4720 | 0.19-0.23 | 0.15-0.35 | 0.85-1.05 | ≤0.025 | ≤0.025 | 0.8-1.05 | 0.9-1.2 | 0.22-0.30 | 0.02-0.05 | 0.40-0.60 | / |
