|
[China]
Trade Verify
Address: 6th Floor, Building 2, No. 615, Ningqiao Road, Jinqiao Economic Development Zone, Pudong New Area, Shanghai
Contact name:
Shanghai Yichen industrial co. LTD |
|
Verified Suppliers
|
|
|
BTH BOLTE Drawn Arc Stud Welding Guns GD-16
Adjustable Hydraulic Piston Damper
The stud welding gun GD 16 is designed for drawn arc stud welding
up to a diameter of 16 mm. The adjustable lift (adjustment range:
0-4 mm) and the adjustable hydraulic piston damper enable the
perfect set up for each welding task. In connection with the piston
with linear ball track, the ample-dimensioned welding cable (cable
cross section: 50 mm²) and the automatic length compensation the
new GD 16 guarantees always perfect welding results.
Highlight of the new gun is the integrated travel measuring system
(optional). Using this the lift adjustment couldn`t be easier.
Moreover, it enables a quality monitoring by measuring and
recording of stud travel (lift, piston runtime, immersion depth)
for each weld.
The GD 16 convinces by easy handling, high reliability and an
ergonomic design. The robust construction ensures a smooth running
even under stringent conditions.
| Welding range | Ø 3-16 mm |
| Welding material | steel, stainless steel |
| Stud length | 10-500 mm |
| Welding method (acc. to DIN EN ISO 14555) | drawn arc (ceramic ferrule and inert gas) |
| Lift | 0-4 mm, adjustable (raster: 0,3 mm) |
| Welding cable | 5 m, 50 mm² |
| Control cable plug | 12-pin |
| Dimensions (WxHxL) | 68x180x260 mm |
| Weight (without cable) | 1,86 kg |
| Item number | B-80-35-1252 |
All drawn arc stud welding guns at a glance
| PHM-10 | PHM-12 | PHM-160 | PHM-161 | GD 12 | GD 15 | GD 16 | GD 19 | GD 22 | GD 25 | |||
| Welding method | ||||||||||||
| Drawn arc (ceramic ferrule) | x | x | x | x | x | x | x | x | x | |||
| Short cycle | x | x | ||||||||||
| Drawn arc (inert gas) | o | o | o | o | o | o | o | o | o | |||
| Welding range (Ø mm) | ||||||||||||
| Drawn arc (ceramic ferrule) | 3-12 | 3-16 | 3-16 | 3-12 | 3-15 | 3-16 | 3-19 | 3-22 | 3-25 | |||
| Short cycle | 2-10 | 3-12 | ||||||||||
| Drawn arc (inert gas) | 3-12 | 3-12 | 3-12 | 3-12 | 3-12 | 3-12 | 3-12 | 3-12 | 3-12 | |||
| Welding material | ||||||||||||
| Steel | x | x | x | x | x | x | x | x | x | x | x | |
| Stainless steel | x | x | x | x | x | x | x | x | x | x | x | |
| Lift (mm) | ||||||||||||
| constant | 1,5 | 2 | 2 | 2 | ||||||||
| adjustable | 0-2,5 | 0-2,5 | 0-2,5 | 0-4 | 0-4 | 0-6 | 0-6 | |||||
| Piston damper (adjustable hydraulic) | x | x | x | x | x | x | ||||||
| Integrated travel measuring system | o | o | o | o | o | o | o | |||||
| Automatic length compensation | x | x | x | x | x | x | x | x | x | x | x | |
| Piston guide | ||||||||||||
| Slide-bearing | x | x | ||||||||||
| Linear ball track | o | o | x | x | x | x | x | x | x | x | x | |
| Welding cable | ||||||||||||
| cross-section (mm2) | 35 | 35 | 50 | 50 | 35 | 35 | 35 | 50 | 95 | 95 | 120 | |
| length (m) | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 2 | 2 | 2 | |
| Welding cable | ||||||||||||
| inside | x | x | x | x | x | x | x | x | ||||
| outside | x | x | x | |||||||||
| Control cable plug | 7-pin | 7-pin | 7-pin | 7-pin | 12-pin | 12-pin | 12-pin | 12-pin | 12-pin | 12-pin | 12-pin | |
| Housing from impact resistant plastics | x | x | x | x | x | x | x | x | x | x | x | |
| Protection of piston guidance from welding spatters | x | x | x | x | x | x | x | x | x | x | x | |
| Dimensions | ||||||||||||
| Width (mm) | 40 | 55 | 67 | 67 | 57 | 57 | 57 | 68 | 68 | 68 | 68 | |
| Height (mm) | 130 | 130 | 172 | 172 | 163 | 163 | 163 | 180 | 180 | 180 | 180 | |
| Length (mm) | 183 | 173 | 255 | 255 | 180 | 195 | 180 | 260 | 260 | 295 | 295 | |
| Weight without cable (kg) | 0,8 | 0,95 | 1,7 | 1,7 | 1,4 | 1,5 | 1,45 | 1,86 | 1,86 | 2,45 | 2,45 | |
| x = Standard, o = Option | ||||||||||||
