Durable Transmission Line Stringing Tools Lever Block Wire Rope Pulling Winch Lifting

 
Transmission Line Stringing Tools Lever Block Wire Rope Pulley Hoist Lifting Wire Rope Pulling Winch
 
Quick Detail
Forward lever, backward lever
Placed in series to provide a slim design and assuring power transfer along the center.
 
Built-in shearing pin
Prevent overload, it functions at approx, 25% overload and the pins can be replaced without removing the load.
 
Anchor bolt
Offers numerous and versatile connection possibilities with load hooks, sling ropes and sling chains.
 
Spare shear pins
Two pieces of spare shear pins locked in the carrying handle.
 
Rope clamp system
Use lever to release easily and install wire rope smoothly.

 

 
Product Description

1. Working principle: Manual wire rope lever hoist is obtained by the lever wrench, and the linear traction matched with the load is obtained by the principle of the lever, and a caliper body acting on the movement of the movement is alternately operated with a load.
2. Scope of application: Manual wire rope lever hoist is suitable for operation in the narrow area where the local space is limited. For field operations, aerial work, lifting operations in the deep well operation of the BYSM-618 3.2 wire rope hand hoist and the inorganic electric energy supply site will show special advantages.
3. How to use: The forward (backward) handle is first pulled to the machine, and then the handle is released by hand to the front of the machine, and the tip can be snapped into the upper step of the housing. At this time, the upper and lower clamps in the front, rear clamps are opened, and can be worn (pulled) through. Then the clamp can be pushed forward and down to release the handle, so that the clamp clamping wire rope (or reset) can be put into operation.
4. Novel body structure: The machine adopts high-strength aluminum alloy body with beautiful appearance, compact, small volume and light weight. Adopt two-stage gear transmission, and the high-speed helical gear transmission, so the transmission is stable and the noise is small.
5. High strength parts: The main parts of the machine are made of high strength alloy steel material and processed by many special heat treatment processes. The upper and lower hooks are made of high-strength alloy steel, which has very strong heat treatment. Even if the body is damaged due to overloading, the hooks will only produce plastic deformation without brittle fracture.