|
[China]
Trade Verify
Address: 101A, 1st Floor, Building 20, Second Industrial Zone, Shapuwei Community, Songgang Street, Baoan District, Shenzhen China 518105
Contact name:Zoey
SHENZHEN JIATUO PLASTIC MACHINERY CO.,LTD |
|
Verified Suppliers
|
|
|
PE/PP Plastic Material Tensile/Bending/Elastic Modulus Testing Machine
PRODUCT DESCRIPTION
The 10kn 20kn Computer control electronic plastic tensile strength testing machine is suitable for metal materials, non-metal materials, composite materials, like metal wire, rebar, wood, cable, nylon, leather, tape, aluminum, alloy, paper, fiber, plastic, rubber, cardboard, yarn, spring etc..This tensile strength testing machine can be equipped with different clamps, then it can test the tensile strength, compression strength, bending strength, bonding strength, tearing strength, breaking strength, yield strength, elongation rate, elastic modulus and so on.
| Max load | 5KN,10KN, 20KN |
| Accurate grade | 1 % /0.5 % |
| Effective measuring range | 0.2%~100%(1grade)/0.4%~100%(0.5 grade) |
| Measuring accuracy | Display the value ±1%/Display the value±0.5% |
| Tester resolution | Max load 1/200000,regardless of inside and outside,constant the resolution |
| Load sensor | Basic configuration:sensor(max load): one Extended configuration:can add more sensors |
| Effective testing width | 390mm(can be widened according to customer’s requirement ) |
| Effective Tensile stroke | 800mm;1000mm;1200mm,(can be increased the height according to customer’s requirement) |
| Range of testing speed | 0.001~200mm/min ; 500mm/min (1000mm/min is option) |
| Accuracy of displacement measurement | Tolerance: ±0.5%/ tolerance: ±0.2% |
| Deformation of measured system(according to the requirements) | Min span :10mm, Max range of deformation :800mm Extended deformation :Min span: 25mm,50mm,100mm, range of deformation :5mm,10mm,25mm |
| Accuracy of measured deformation | Tolerance :±0.5% (according to requirement of customer to choose the larger or small deformation) |
| safety | Electronic-limit protection |
| Testing platform moving device | Fast /slow two speeds to control,can jog |
| Return back | Manual or automatic operation,After the test, the moving iron return to initial position with the highest speed by manual or automatic operation |
| Overload protection | Overload 10%,automatic protection |
| fixture | A set of tensile fixture |
| Machine size | 80x55x220cm(length*width*height) |
| Power system | Panasonic AC Servo Motor + Driver + high-precision ball screw |
| Power supply | 220V,50HZ, |
| Power | 0.4KW(depending on different demand of force, using different motor) |
| Machine weight | (about)250 Kg |
| Units | Kg, N, LB, TON, can be exchanged. |
CHARACTER
Brief: It adopts full digital power, displacement and speed three
closed loop control, using AC motor and control drive system, with
Taiwan precision worm gear reducer and Taiwan TBI precision screw
drive to achieve the transmission efficiency and signal-to-noise
ratio of the best effect.
Function: Tester is used to test physical properties of elongation,
compression, peeling, tearing bending, 3-point bending, shearing of
metallic and non-metallic material and so on.
Meeting standards: It can be customized to meet GB, ISO, JIS, ASTM,
DIN requirement and the standard provided by client to test and
data processing.
Application ranges: This machine is commonly applied in material
analysis in auto-parts, fastener, aerospace, cable and wire,
plastic and rubber, paper packing industries.
FAQ
Q:Are you a trade company or factory?
A:Our company is a factory and directly sales.
Q:Can your company accept customization?
A: Yes. Our machines can be customized by client.
Q:How to guarantee your after-sales service?
A:Our philosophy is one year warranty and lifetime service. After
the warranty period is exceeded, if there is any problem, we will
provide support for you in time. (only charge travel expense and
parts cost at most.)
Q:What is the language about software?
A:It can switch between Chinese and English.
Q:May the customer not use your company's computer?
A:Sure. But please tell us what type your computer is. We need to
confirm your computer can install the software. And we can subtract
the price of computer from offer.
Q:What is the different between Type-S and Type-W?
A:Type-S can test multistep experiment, hold loading,bending, yield
strength, modulus of elasticity with import upgrade servo, but the
Type-W can not do these tests.
