Auto Walk Concrete Floor Grinder Inverter 15 KW Self Propelled
Planetary System
Quick Detail:
Name | 12 heads floor polishing machine | Application | Marble, granite, terrazzo, concrete floor |
Type | Z12-X-750 | Function | Leveling, polishing, grinding, renovating |
Description:
- 750 mm large work areas improve the work efficiency.
- Separated body make it easy for carrying.
- With multifunction plate include magnetic discs and Velcro discs
meet different clients’ demand.
- Four plates, each fix 3 pieces small discs, total 12 pieces small
discs one machine, each time need fix 12 pieces polishing pads.
- Handle is adjustable, is easy to control.
- With inverter could adjust the speed from 0 to 1500 rmp.
- Use good quality bearing.
Specification:
Type | Z12-X-900 | Z12-X-850 | Z12-X-800 | Z12-X-750 |
Voltage | 380V | 380V | 380V | 380V |
Motor power | 15KW | 15KW | 15KW | 11KW |
Inverter power | 15KW | 15KW | 15KW | HKW |
Driving speed | 0-3.7km/h | 0-3.7km/h | 0-3.7km/h | 0-3.7km/h |
Auto Rotation | 0-1250rmp/m | 0-1250rmp/m | 0-1250rmp/m | 0-1250rmp/m |
Revolution speed | 0-320rmp/m | 0-320rmp/m | 0-320rmp/m | 0-320rmp/m |
Work width | 4>900mm | (b850mm | 800mm | 4>750mm |
Grinding disc | 4pcs (12/24 discs) | 4pcs (12/24 discs) | 4pcs (12 discs) | 4pcs (12 discs) |
Water tank | 30L | 30L | 30L | 30L |
Weight | 720KGs | 640KGs | 590KGs | 550KGs |
Planetary Grinder Operation instruction:
- Fix the grinding disc, please put the handle in horizontal
position, press the handle down by power to make the bottom disc tilting, and the grinding
disc turn up, and stick the grinding pads on.
- Lay the machine back to the floor slowly to let the grinding pads
reach the floor. (Please lay lightly).
- Put the add weight down to the back of the machine, wear the
dustband.
- Fix the power supply wire. (Safety operation)
- Hold the machine handle, pull out the bolt, then pull and push the
handle adjuster bar to adjust the handle in a proper position for
operation, fix the handle by the bolt at last.
- Turn on the water switch when need water, if you would like dry
grinding, please connect the outside dust collect with dust vacuum
cleaner.
- Turn on the power supply switch and the machine begin to work.
- Stop the machine to change the grinding pads.
- Keep the speed above 1000rpm during operation.
Operation Safety:
- While operation, to keep safe must wear safety helmet and safety
shoes, in addition, use mask and earplug according to the operation
condition.
- Non-against exploding construction, so absolutely do not put
flammable substances of petrol, thinner and gas etc nearby.
- Regarding to the noise, please comply with relative rules in
local,do not give trouble to the surroundings.
- Absolutely do not touch the motor during operation, otherwise it's
easy to scald; also parts of the grinding heads will be too hot to
touch.
- It had better use our grinding assessories or the appointed
products made by our company such as grinding pads , if use other
products, it perhaps will injure operator's body. Therefore the
incident does not belong to the scope of product quality if it
happens during use other company's accessories .
- If machine runs abnormally , and un-usual condition during using
the machine, immediately stop the operation, examine and repair it
after confirming the safety.
Detail picture:
Available abrasive:
- Diamond resin pads
- Diamond grinding shoes
- Metal diamond grinding discs
Z-X12-750 Auto-Walk Grinder Manual.pdf