Active Member
|
[China]
Address: Building C,No.2 Dongkeng street,Dongping dongfeng East Road,Baiyun District.Guangzhou
Contact name:Betty Kong
GUANGZHOU BOSHANG MACHINERY MANUFACTURING CO LTD |
|
|
Automatic Adhesive glass bottle front and back labeling machine
Application
This machine is suitable for flat bottle,square bottle,round bottle same side with two labels’ labeling
Can quickly switch to a different size bottle, simple to cooperate,orderliness beautiful, clean, easy to wash
Applicable to all industries suitable for two labels front and back side labeling , such as daily chemicals, petroleum, machine oil, cleaning supplies, food and beverage, pharmaceutical and so on.
New design labeling head:using boshang patent design of new concept,increase strong rigidity making,multi-dimensional adjustment(PATENT NO.:ZL 2013 2 0634848.0)
Transport sector: Taiwan imported AC motor 1500W, Danfoss frequency converter adjust the speed
Guide Bottle institution: double coordinates adjusted scratch check rails in SS.
Bottle dividing institution: Panasonic Motor,frequency control of motor speed.
New style patent synchronous chain correcting institution: Panasonic motor, frequency converter adjust the speed , synchronous with the conveyor. (specially widely suit for cone bottle’s correcting,strength making,and suit for large range bottle,patent no.ZL 2013 2 0634870.5)
Top belt holder Pressing institution: spiral bevel gear transmission, synchronized with the conveyor institution
Scratch label institution: sponge spring steel plate combination, Teflon patch.
Pressure label institution 1: Combination non-power roller, quickly removable to accommodate different sizes of labels.
Large rubber roll institution : use 70% hardness large rubber roller constructure, motor control (Patent No.:ZL 2014 3 0276057.5)
Machine design is reasonable strong rigidity,used patent design ZL 2013 3 0450306. 3
Technical Parameter
| Production speed | 250BS/min |
| Labeling accuracy | ±1mm |
| Label max width | Neck label125mm front back label195mm |
| Bottle diameter | Thickness≥30mm Height≤500mm |
| Label inner diameter | 76.2mm |
| Label outer diameter | 400mm |
| Outline size | L4080 W1200×1600mm |
| Weight | 650KG |
| Using power | 380V/220V 50Hz 6500W |
WT-650GS performance comparison between the labeling machine and others
1)The labeling machine use ultra-small inertia servo motor, but most of the labeling machine still use the stepper motor
2)The machine with PLC control, rather than general SCM
3) The HMI of the machine is a real sense of the digital control, rather than simply display
D:Transport sector: imported AC motor, Frequency converter speed regulation
Ultra-high-power AC motor, with a large capacity inverter, the
speed of sending bottles more stable, which will help improve the
labeling accuracy;
In the labeling process of the machine, position of the optical
switch for measured object can be adjustable to achieve
zero-latency, so the machine can achieve zero pitch labeling, and
improve greatly the production speed, in the past, most of labeling
machine ,measured Optoelectronic switch was Fixed, using delayed
control, that is, when measured Optoelectronic switch give the
signal, the system delays the label, but if in the process, the
system voltage changes, or changes in the load conveyor, then the
position of label Will have a significant deviations
E:labeling institution
Labeling machine head octuple space adjustment, the angle can be adjusted freely, easy to paste a variety of difficult and transparent label; high elastic sponge scraper and non-powered round extrusion, to ensure that no air bubbles; mechanical structure of machine uses an enhanced rigid design , Simple, generous and stable.
