Excellent Insulation Textile Stenter Machine Horizontal Rail Friendly HMI

Good insulation heat setting stenter , horizontal rail , friendly HMI

♦ Stenter Application:

A machine or apparatus for stretching or stentering fabrics. The purpose of the stenter machine is to bringing the length and width to pre determine dimensions and also for heat setting and it is used for applying finishing chemicals and also shade variation is adjusted. The main function of the stenter is to stretch the fabric widthwise and to recover the uniform width.

This machine is specifically used for cotton, polyester cotton, dacron, chemical fiber, elastic fabric to stenter, set, finish after desizing, mercerizing, coating.

♦ Machine process

Open width cloth feeding → Cloth tensioner → Infrared centering device → padding squeezer→ One column with ten Φ800mm drying cylinders (coated with teflon) → Deviation corrector cloth expander → Front overfeed → Infrared rack edge detector → Pinning on → Eight chamber natural gas setting → Cold wind cooling → Pinning off → Rear overfeed → Two cooling rollers cool down →Open width doffing.

or 

Plaint Entry -- 2-Roller slant Padder -- Obligate Photoelectric Weft Strangtener – Overfeeding -- Tridactylous Edge Spreader, Infrared Edge Sensor -- Pin or Clip or Combied Pin-Clip -- Stentering and Drying in the 8 Drying Chambers – Air-Jet Cooling -- Cooling Roller Cooling -- Swing Outlet.

♦ Main technique data:

(1) Machine Hand: Left hand or right hand

(2) Machine Max. nominal width: 3600mm

(3) Machine design speed: 10~150m/min

(4) Fabric stentering range: 500mm~3400mm

(5) Front and back center distance between the pin plate chain plate: according to the design

(6) Heating source: Natural gas/thermal oil/ steam/electricity etc.

(7) Max.Temperature: 230℃

(8) Cloth guide roller: diameter Φ150mm, cloth guide roller is stainless steel composite roller

(9) Pin plate operation mode:  chain run on oil free lubricated rail, pin plate seat installed by two screws run on roller chain

(10) Width adjusting method and range: Infrared rack edge detector width adjustment in the first section rail, electric width adjustment in the second section rail. Width adjustable range: 800~2000mm

(11) Drying method: Adopt imported ‘Maxon’ brand natural gas burner drying setting or others

(12) Transmission mode: Pin plate stretching main transmission use Taiwan LK transmission case to transmit, dragged by one motor. Doffing frame is dragged by one motor. Cabinet inner bearing adopt Janpan NSK brand, other parts use the products from HRB factory.

(13) Shape size: according to the different design

(14) Machine weight: about 70T