|
[China]
Trade Verify
Address: Haizhou Zone,Lianyungang,Jiangsu,China
Contact name:Olivia
Lianyungang Dapu Metal Material Co., Ltd |
|
Verified Suppliers
|
|
|
Type 403 has a metric density of 7.80 g/cm3. A martensitic kind of alloy, Type 403 stainless steel has lower silicon and chromium content than the type 410. It gives it apt strength, toughness and ductility leading to its use as compressor blades, rods and other turbine parts. It scores 80 on the Rockwell B scale, and it has a tensile strength of 485 MPa.The modulus of elasticity lies in between 190-210 GPa. Type 403 has a specific heat capacity of 0.460 J/g-°C. In comparison to the austenitic 300 series, the Grade 403 is overall high on-resistance, but it is not as resistant to corrosion and oxidation as the 300 series. This alloy is also prone to rust under specific conditions. It is also magnetic by property.
| Item | Dimension | Thickness | Tolerance | Length | |
| mm | mm | OD/Side | Thickness | 1).Random length 2).Fixed length 3).Max length:22m | |
| Seamless | OD:4-914 | 0.5-50 | +/-0.2mm | +/-0.05mm | |
| Welded | OD: 6- 630 | 0.15-25 | +/-0.2mm | +/-0.05mm | |
| Square | 10*10-100*100 | 0.25-4 | +/-0.2mm | +/-0.05mm | |
| Rec. | 6*10-42*114 | 0.25-4 | +/-0.2mm | +/-0.05mm | |
| Material | TP304,TP304L,TP304/304L,TP304H,TP321,TP321H,TP321/321H,TP316L,TP316/316L,TP316H,TP316TI,TP317L,TP310S,TP347/347H, 904L,S32205,S31803,S32750,S31500 | ||||
| Usage | Pipeline Transport, Medical Equipment, Heat Ex-changer, Boiler Pipe, Hydraulic/Automobile Pipe,Oil/Gas Drilling, Food/Beverage/Dairy Products, Machinery Industry, Chemical Industry, Mining,Construction & Decoration | ||||
| Surface | Polished,Bare Black ,Pickled ,Painting, Anti-corrosion,Bevel,Plastic Cap,POE&TOE | ||||
Products covered with boards are used for transportation
protection.
All products will be packed in solid wooden packaging.
Each carton with good support and reinforcement.
Take photos of container loading and seal the container.
Fast transportation speed. Let the customer know every step.
FAQ:
