|
[China]
Trade Verify
Address: 420,NO74-8,NORTH STREET,YUHANG,HANGZHOU,ZHEJIANG,CHINA
Contact name:Ben
HANGZHOU NORVEE MACHINERY CO.,LTD |
|
Verified Suppliers
|
|
|
OEM stainless steel 301 tobacco pusher spring 2N for vending machine
Springs'Specifications:
Load Type:Torsion
Material:Stainless Steel, Stainless steel or carbon steel,Usage:dispenser,vending machine etc.
ProvideColours:Yellow,black,white as your request,Width:1MM-250MM,Thickness:0.08MM-8MM
| Material | Stainless steel,carbon steel,62Si2Mn,60Si2Mn,65Mn,SK4,SK5 |
| Load type | Constant and variable force |
| Thickness of material | 0.08mm~ 1.8mm |
| Wire diameter | 0.01mm~ 10mm |
| Width | 1mm~ 250mm |
| Inside diameter | As your request |
| Outside diameter | 1 mm and above. |
| Length of springs | Free length as you need |
| Surface treatment | Zinc plated, nickel plated, black coating,also can be done as customers request |
| Application | Furniture,industrial equipment,electronic devices,etc |
| Equipments | Advanced CNC computer spring machines with high precision and efficiency |
| Technology | Experienced engineers ,technicians and Skilled Workers |
| Certification | ISO9001:2008 |
| Advantage | High quality, competitive prices,automatic production equipment, , safe package and fast delivery
|
Power springs are identified by the many coils of strip material stored in a case, barrel, or band, and connected to a central arbor or shaft. When this shaft is rotated, the material starts to wind flat against it. This action creates an increasing torque for as many turns as it can be wound until there is no material left.
The constant force spring consists of strip material, which has been shaped and pre-tensioned into a tightly wound roll. The spring is used in a linear movement and produces almost constant force throughout its deflection. Constant force springs can be fitted in a number of ways and extended partly or completely. There is practically no limit on extension speed and acceleration.
Our capabilities of power springs range from 0.002 inch to 0.125 inch material thickness and from 0.030 inch to 3 inch material widths. Power springs can be made using pre-stressed (back wound) or conventional (from flat) methods. Pre-stressed power springs are spooled to a special free diameter and back wound into a housing or keeper, while conventional wound springs are manufactured and wound in the flat state. The advantages of pre-stressed springs are that it allows maximized torque from a specific material. Conventional wound power springs, however, offer increased cycle life.
· seatbelt retractors
· tape measures
· retractable dog leads
· electrical cord retractors
· hose reels
· wind-up toys
· pull start on small gas-powered engines
· tool balancers
· valves
Our capabilities of power springs range from 0.002 inch to 0.125 inch material thickness and from 0.030 inch to 3 inch material widths. Power springs can be made using pre-stressed (back wound) or conventional (from flat) methods. Pre-stressed power springs are spooled to a special free diameter and back wound into a housing or keeper, while conventional wound springs are manufactured and wound in the flat state. The advantages of pre-stressed springs are that it allows maximized torque from a specific material. Conventional wound power springs, however, offer increased cycle life.
