Active Member
|
[China]
Address: 16-143, No. 26 Nankai Road Suofang Street, Xinwu Dist, Wuxi City
Contact name:Shawna
JIANGSU IRUNT STEEL GROUP CO., LTD. |
|
|
Building Material 0.13-0.6mm G550 Cold Rolled Steel Coil Galvalume Steel Coil
| Thickness | 0.13-0.60mm |
| Width | 750-1250mm |
| AZ Coating | 30-250gsm |
| Coil ID | 508mm/610mm |
| Material | SGCC/CGCC/Tdc51dzm/Tdc52dts350gd/Ts550gd/Dx51d |
| Hardness | Soft hard(60),medium hard(HRB60-85),full hard(HRB85-95) |
| Surface Structure | Regular spangle, Minimum spangle, Big spangle, Zero spangle |
| Composition | AL55%, ZN43%, SI 2% |
| Corrosion resistance | the life of GL is 2-5 times longer than GI |
| Heat resistance | withstand high temperature 500-600ºC |
| Heat-reflective | the high reflection making it becomes an effective barrier against heat |
| Application | Be used outside directly or base material of PPGL, roofing, Builfing&Construction |
Hot dipped galvanized steel coil, the thin steel plate is immersed in the molten zinc tank, so that a thin steel plate with a
layer of zinc is adhered to the surface. At present, the continuous galvanizing process is mainly used for production, that is,
the rolled steel sheet is continuously immersed in a galvanized bath with molten zinc to make a galvanized steel sheet;
alloyed galvanized steel sheet. This kind of steel plate is also manufactured by hot dipping method, but immediately after
leaving the tank, it is heated to about 500°C to form an alloy film of zinc and iron. This galvanized coil has good paint
adhesion and weldability.
Galvanized steel coils are widely used in construction,
communications, electricity, transportation, energy, automobiles,
light industry (household appliances), agriculture, animal
husbandry and fishery, petrochemical and other industries.
For galvanized coils, the thin steel plate is immersed in the
molten zinc tank, so that a thin steel plate with a layer of zinc
is adhered to the surface. It is mainly produced by continuous galvanizing process, that is,
the coiled steel sheet is continuously immersed in a galvanized
bath with molten zinc to make galvanized steel sheet; alloyed galvanized steel sheet. This kind of steel plate is also manufactured by hot dipping
method, but immediately after leaving the tank, it is heated to
about 500°C to form an alloy film of zinc and iron. This galvanized coil has good paint adhesion and weldability.
(1) Normal spangle coating
In the normal solidification process of the zinc layer, zinc grains
grow freely to form a coating with obvious spangle morphology.
(2) Minimized spangle coating
During the solidification of the zinc layer, the zinc crystal
grains are artificially restricted to form the smallest possible
spangle coating.
(3) Spangle-free coating spangle-free
It is obtained by adjusting the chemical composition of the plating
solution, does not have a visible spangle morphology, and has a
uniform surface coating.
