Home Companies RISHBIN CO., LTD

±0.3mm Steel Slitting Equipment Strip Width ≥70mm Sheet Steel Slitting Machine

Active Member

Contact Us

[China]

Address: No. 10, Jingshi Rd, Wuxi, China

Contact name:Chris Ho

RISHBIN CO., LTD

±0.3mm Steel Slitting Equipment Strip Width ≥70mm Sheet Steel Slitting Machine

Country/Region	china
City & Province	wuxi jiangsu

Product Details

RS 3.0-10.0 Steel Slitting Line Medium Gauge 0-30/50m/Min PLC Automatic Control

Medium Gauge Slitting Lines Characteristic

These knives partially penetrate the coil stock causing a crack or fracture on both sides of the stock, separating the mults from one another. Rubber stripper rings are also employed depending on the material thickness to attain a good edge so no burr is present that will hinder downstream operations. As the material is slit, the far outside edges of the coil have edge trim.

This edge trim is taken up on a scrap winder. If the material to be slit is extremely thin, a looping pit can be used to take up the varying thickness of the mults as the edge cuts are generally thinner than the center cuts. The thin the material, the longer the lineal footage in the master coil.
The looping pit will take up the additional volume prior to entering the tension stand. The tension stand is located prior to the recoiler. A tensioning device is needed because the master coil is crowned or larger in diameter in the center of its width than at the edges.

Fully automatic strip threading systems
Special braking units for strips with high surface finish
Non-contact braking strips for the aluminum industry
Automatic knife change
Knife arbors with quadruple radial precision bearings
Automatic clamping and unclamping of the cutting tools on the knife arbor
Automatic strip strand transfer systems

Medium Gauge Slitting Lines Specification

Model No.	RS 1.0-6.0	RS 2.0-8.0	RS 3.0-10.0
Coil Material	CR Coils , HR Coils, S.S Steel Coils, GI Coils , AL Coils, Copper Coils Picking Oil Coils
Coil Thickness	1.0～6.0mm	2.0～8.0mm	3.0～10.0mm
Line Speed	0～110m/min	0～50/80m/min	0-30/50m/min
Coil Weight	≤30T(35T)	≤30T(35T)	≤30T(35T)
Coil I.D	Φ508,φ610,φ760mm	Φ508,φ610,φ760mm	φ508,φ610,φ760mm
Coil O.D	≤φ2200mm	≤φ2200mm	≤φ2200mm
Strip Width	≥30mm	≥50mm	≥70mm
Number of Strip	4～15	5～20	5～18
Slitting Accuracy	±0.3mm	±0.3mm	±0.3mm
Blade shaft	Ф260mm	Ф280mm	Ф300mm
Electrical Control System	PLC Automatic control	PLC Automatic control	PLC Automatic control

Customized slitting lines for every different kind of metal strip and in all required dimensions would be available.

Medium Gauge Slitting Lines Main Technical Specifications

COIL/ROLL DETAILS	Material	HR, CR, SS, GI, PPGI, Copper
	Tensile Strength	δb≤600Mpa,δS≤360Mpa
	Coil/Roll thickness	1-10mm
	Steel Coil/Roll width	500-2200(Max)
	Coil/Roll I.D	Φ500-760 mm
	Coil/Roll O.D	Φ2000mm(Max)
	Steel Coil/Roll Weight	35T(Max)
Slitter parameters	knife pivot diameter	Ф220 mm
	Knife pivot material	40Cr
	Blades specification	Φ220mmXφ360mmX20mm
	Blade material	6CrW2Si
	Max slit quantity	4 pcs (4mm) 20 pcs(1mm)
	Width precision	≤±0.05mm
Other parameters	Power	380V/50Hz/3Ph(Customized)
	Line speed	0-80m/min
	Capacity	360 KW
	Whole line Dimension	45m(L)X10m(W)
	Line direction	From right to left(Face to machine)
	Machine color	Blue