Professional Metal Slitting Line Cost Effective ≥100mm Strip Width
Minimum Burr
Quick Details:
- Minimum Burr on strip.
- Automatic Coil Loading
- 2 complete slitting heads for quick offline tooling
changeovers.
- Straight edged recoiling.
- Economic efficency due to high automation level.
- Ease of Operation and Maintenance
- Slitting Lines are available in different sizes and models as
per the demands and specifications laid by the clients.
- It is available in different capacities and standards
according to the demand of the clients.
- These Slitting Lines are widely appreciated amongst our
clients for their user friendly designs and high resistance to
temperature variations.
Metal Slitting Line Working procedure:
In the beginning, the coil is loaded on the coil car by crane and
brought to the uncoiler by operating the coil car. Coil car
centralizes the coil with the uncoiler mandrel and the coil is
mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates
the coil. Peeler breaks the straps and brings the pre end upto
Pinch roll. The Pinch roll drives the coil end upto the slitter.
Then its drive is disconnected. Slitter moves the slitted strips
further. Slitted strips are threaded through loop table and drag
tensioner into the recoiler drum. Recoiler winds one turn on loose
coil.
Then drag tensioner and loop are put into operation. Slitter and
recoiler run simultaneously in synchronization. As the coil build
up, the recoiler rpm correspondingly goes down to keep desired
constant line speed. This process goes on until the end of coil on
uncoiler. The slitted coil is pushed on the exit coil car through a
pusher plate operated by hydraulic cylinder. The side slitted scrap
is wound on the scrap winder units provided on both sides of the
slitter.
Metal Slitting Line Specification:
Model No. | RS 3.0-12.0 | RS 4.0-16.0 | RS 6.0-20.0 |
Coil Material | CR Coils , HR Coils, S.S Steel Coils, GI Coils, AL Coils, Copper
Coils Picking Oil Coils |
Coil Thickness | 3.0~12.0mm | 4.0~16.0mm | 6.0~20.0mm |
Line Speed | 0~60m/min | 0~50m/min | 0-50m/min |
Coil Weight | ≤30T(35T) | ≤30T(35T) | ≤30T(35T) |
Coil I.D | φ508,φ610,φ760mm | φ508,φ610,φ760mm | φ508,φ610,φ760mm |
Coil O.D | ≤φ2200mm | ≤φ2500mm | ≤φ2500mm |
Strip Width | ≥100mm | ≥100mm | ≥100mm |
Number of Strip | 5~20 | ≤5 | ≤5 |
Slitting Accuracy | ±1.0mm | ±1.0mm | ±1.0mm |
Blade shaft | Ф320 | Ф340mm | Ф360mm |
Electrical Control System | PLC Automatic control | PLC Automatic control | PLC Automatic control |
COIL/ROLL DETAILS | Material | HR, CR, SS, GI, PPGI, |
Tensile Strength | δb≤550Mpa,δS≤260Mpa |
Coil/Roll thickness | 6-20mm |
Steel Coil/Roll width | 600-2500(Max) |
Coil/Roll I.D | Φ500-760 mm |
Coil/Roll O.D | Φ2500mm(Max) |
Steel Coil/Roll Weight | 35T(Max) |
Slitter parameters | knife pivot diameter | Ф360 mm |
Knife pivot material | 40Cr |
Blades specification | Φ360mmXφ360mmX20mm |
Blade material | 6CrW2Si |
Max slit quantity | 4 pcs (16mm) 8 pcs(8mm)(Customized) |
Width precision | ≤±0.05mm/2M |
Other parameters | Power | 380V/50Hz/3Ph(Customized) |
Line speed | 0-60m/min |
Capacity | 450 KW |
Whole line Dimension | 45m(L)X10m(W) |
|
Line direction | From right to left(Face to machine) |
Machine color | Blue |