Home Companies RISHBIN CO., LTD

Hot Rolled Stainless Steel Slitting Machine High Grade Thickness 6-20mm 0-60m/Min

Active Member

Contact Us

[China]

Address: No. 10, Jingshi Rd, Wuxi, China

Contact name:Chris Ho

RISHBIN CO., LTD

Hot Rolled Stainless Steel Slitting Machine High Grade Thickness 6-20mm 0-60m/Min

Country/Region	china
City & Province	wuxi jiangsu

Product Details

RS 4.0-16.0 Heavy Gauge Stainless Steel Slitting Machine Coil Roll thickness 6-20mm 0-60m/min

Stainless Steel Slitting Machine Benifits

Raw material is CR material ,HR material , silicon steel, S.S steel ,Color steel, AL ,PPGI

Heavy Gauge Slitting Lines are used for different sizes coils with different thickness to be slit into special strips as requirements.These products are for roll mill ,HF tube mill,cold forming machines ,punching &press machines etc.

High availability
Low operating costs
High automation level to reduce non-productive times
Flexibility from customer-specific arrangement and design
Separate coil preparation system
Tool change turnstile to minimize the program change times
Edge scrap shear with hydraulically operated knife heads in tapered polygonal design for rapid knife head change
High quality of the final product

RISHBIN provides decades of experience from numerous lines supplied to well-known customers worldwide. Many years of experience in the design, manufacture and commissioning sectors demonstrate our expertise in supplying customer-oriented solutions.

To help you achieve your own production capacity target, RISHBIN Slitter supplies many options, such as high speed slitting, medium speed slitting, etc. All slitters are easy to operate. They are very reliable, steady performers for both short and long terms running productions.

The thickness can range from the thinnest down to 3.0 mm, to the thickest up to 20 mm

Strip Width, from the narrowest 400 mm to the widest 2500 mm

Coils Weight, up to 35 tons

Line Speed, up to 60 m/min.

Stainless Steel Slitting Machine Working procedure:

In the beginning, the coil is loaded on the coil car by crane and brought to the uncoiler by operating the coil car. Coil car centralizes the coil with the uncoiler mandrel and the coil is mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates the coil. Peeler breaks the straps and brings the pre end upto Pinch roll. The Pinch roll drives the coil end upto the slitter. Then its drive is disconnected. Slitter moves the slitted strips further. Slitted strips are threaded through loop table and drag tensioner into the recoiler drum. Recoiler winds one turn on loose coil.

Then drag tensioner and loop are put into operation. Slitter and recoiler run simultaneously in synchronization. As the coil build up, the recoiler rpm correspondingly goes down to keep desired constant line speed. This process goes on until the end of coil on uncoiler. The slitted coil is pushed on the exit coil car through a pusher plate operated by hydraulic cylinder. The side slitted scrap is wound on the scrap winder units provided on both sides of the slitter.

Stainless Steel Slitting Machine Specification:

Model No.	RS 3.0-12.0	RS 4.0-16.0	RS 6.0-20.0
Coil Material	CR Coils , HR Coils, S.S Steel Coils, GI Coils, AL Coils, Copper Coils Picking Oil Coils
Coil Thickness	3.0～12.0mm	4.0～16.0mm	6.0～20.0mm
Line Speed	0～60m/min	0～50m/min	0-50m/min
Coil Weight	≤30T(35T)	≤30T(35T)	≤30T(35T)
Coil I.D	φ508,φ610,φ760mm	φ508,φ610,φ760mm	φ508,φ610,φ760mm
Coil O.D	≤φ2200mm	≤φ2500mm	≤φ2500mm
Strip Width	≥100mm	≥100mm	≥100mm
Number of Strip	5～20	≤5	≤5
Slitting Accuracy	±1.0mm	±1.0mm	±1.0mm
Blade shaft	Ф320	Ф340mm	Ф360mm
Electrical Control System	PLC Automatic control	PLC Automatic control	PLC Automatic control

COIL/ROLL DETAILS	Material	HR, CR, SS, GI, PPGI,
	Tensile Strength	δb≤550Mpa,δS≤260Mpa
	Coil/Roll thickness	6-20mm
	Steel Coil/Roll width	600-2500(Max)
	Coil/Roll I.D	Φ500-760 mm
	Coil/Roll O.D	Φ2500mm(Max)
	Steel Coil/Roll Weight	35T(Max)
Slitter parameters	knife pivot diameter	Ф360 mm
	Knife pivot material	40Cr
	Blades specification	Φ360mmXφ360mmX20mm
	Blade material	6CrW2Si
	Max slit quantity	4 pcs (16mm) 8 pcs(8mm)(Customized)
	Width precision	≤±0.05mm/2M
Other parameters	Power	380V/50Hz/3Ph(Customized)
	Line speed	0-60m/min
	Capacity	450 KW
	Whole line Dimension	45m(L)X10m(W)

	Line direction	From right to left(Face to machine)
	Machine color	Blue

Hot Products

Customized Color Steel Slitting Line Machine Roll Width 600-2500 Max Sheet Metal Industry

Contact Us

RISHBIN CO., LTD

Hot Rolled Stainless Steel Slitting Machine High Grade Thickness 6-20mm 0-60m/Min

Product Details

Hot Products

Customized Color Steel Slitting Line Machine Roll Width 600-2500 Max Sheet Metal Industry

Medium Gauge Steel Sheet Slitting Machine Blade Shaft Ф300mm Knife Pivot Material 40Cr

High Speed Metal Slitter Machine VF Speed Adjusting Touch Screen For 5-20 Strips

±0.3mm Steel Slitting Equipment Strip Width ≥70mm Sheet Steel Slitting Machine

Automation Rolled Steel Rolled Slitting Line Galvanized Steel High Speed

Optional Color Steel Coil Slitting Line , Sheet Metal Slitter Machine