|
[China]
Trade Verify
Address: 20TH FLOOR,NO.1 NEW WORLD BUILDING ,NO.1018 MINAN ROAD,YINZHOU DISTRICT, NINGBO CITY, ZHEJIANG PROVINCE, CHINA
Contact name:Jikin Cai
Yuhong Group Co.,Ltd |
|
Verified Suppliers
|
|
|
ASME SA213 TP347H 1.4912 Seamless Tube Heat Exchanger Steam Boiler
ASME SA213 covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes.
Because of the stable element Nb, it has good intergranular corrosion resistance, high endurance strength and oxidation resistance, as well as good technological properties such as bending and welding.
ASTM A213 Grade 347H stainless steel tube is the most widely used commercial grade of stainless steel supplied into numerous industry sectors which also referred as WNR 1.4961 Seamless Tube.
YUHONG GROUP is specialized in supplying ASME SA213/213M Stainless Steel tubes Grades TP347, TP347H; ASTM A213 TP347, TP347H Seamless Steel tubes.
Applications:
-Pharmaceutical Equipment
-Chemical Equipment
-Sea Water Equipment
-Heat Exchangers
-Condensers
-Pulp and Paper Industry
-Off-Shore Oil Drilling Companies
-Power Generation
-Petrochemicals
-Gas Processing
-Specialty Chemicals
-Pharmaceuticals
Heat Treatment Requirements:
| Grade | UNS | Heat Treat Type | Austenitizing/ Solutioning Temperature, min or range °F [°C] | Cooling Media | ASTM Grain Size No. B |
| Designation | |||||
| TP347 | S34700 | Solution treatment | 1900 °F [1040 °C] | water or another rapid cool | . . . |
| TP347H | S34709 | Solution treatment | cold worked:2000 | water or another rapid cool | 7 |
| [1100] hot rolled: 1925 [1050]H |
Tensile Requirements:
| Grade | Tensile Strength, Min ksi [MPa] | Yield strength, min ksi [MPa] | Elongation in 2 in. or 50 mm, min, %A, B | Hardness, Max | |
| Brinell/Vickers | Rockwell | ||||
| TP347 | 75 [515] | 30 [205] | 35 | 192HBW/200Hv | 90HB |
| TP347H | 75 [515] | 30 [205] | 35 | 192HBW/200Hv | 90HB |
Chemistry Composition of TP347H:
| C, % | Si, % | Mn, % | P, % | S, % | Cr, % | Ni, % | Nb, % |
| 0.04-0.10 | 1.00 max | 2.00 max | 0.045 max | 0.030 max | 17.0-19.0 | 9.0-13.0 | 8*C-1.1 |
Mechanical Properties:
| Tensile Strength , MPa | Yield Strength, MPa | Elongation, % | Hardness, HB |
| 515 min | 205 min | 35 min | 192 max |
Outside Diameter & Tolerance:
| Hot rolled | Outside Diameter, mm | Tolerance, mm |
| OD≤101.6 | +0.4/-0.8 | |
| 101.6＜OD≤190.5 | +0.4/-1.2 | |
| 190.5＜OD≤228.6 | +0.4/-1.6 | |
| Cold Drawn | Outside Diameter, mm | Tolerance, mm |
| OD＜25.4 | ±0.10 | |
| 25.4≤OD≤38.1 | ±0.15 | |
| 38.1＜OD＜50.8 | ±0.20 | |
| 50.8≤OD＜63.5 | ±0.25 | |
| 63.5≤OD＜76.2 | ±0.30 | |
| 76.2≤OD≤101.6 | ±0.38 | |
| 101.6＜OD≤190.5 | +0.38/-0.64 | |
| 190.5＜OD≤228.6 | +0.38/-1.14 |
Inspection & Test:
-Chemistry composition
-Tensile test
-Hardeness test
-Flattening test
-Flaring test
-NDT
-Surface inspection and dimension check
