|
[China]
Trade Verify
Address: 20TH FLOOR,NO.1 NEW WORLD BUILDING ,NO.1018 MINAN ROAD,YINZHOU DISTRICT, NINGBO CITY, ZHEJIANG PROVINCE, CHINA
Contact name:Jikin Cai
Yuhong Group Co.,Ltd |
|
Verified Suppliers
|
|
|
ASTM A516 GR.70 Dishead , Boiler and Pressure Vessel application
From 2011 to now , YUHONG GROUP already support Dishead to more
than 300 client, the dishead was width used in Boiler, Heat
Exchange, Pressure Vessel , Chemical Tank ,... YUHONG woundful
experience can support client well .Yuhong Group supply high quality dishead for boiler and
pressure vessel fabrication which is ideally suited to the high
standards set by the oil, gas and petrochemical industry – this is
why we stock an extensive range of carbon plates according to ASTM
A516 Grade 70.
ASTM A516 Grade 70 is an excellent choice for service in lower than
ambient temperature applications, has excellent notch toughness and
is used in both pressure vessels and industrial boilers.
A516 Grade 70 offers greater tensile and yield strength when
compared to ASTM A516 Grade 65 and can operate in even lower
temperature service.
Our plates come with mill certification in accordance with EN10204
3.1 or EN10204 3.2. Our plates are fully traceable, usually with
hard stamping and we welcome any third party or customer inspection
if required which can be arranged with the client.
Table 2: Mechanical Properties of ASTM A516 Grade 70
| DESCRIPTION | GRADE 65 |
|---|---|
| Tensile strength (ksi) | 70-90 |
| Tensile strength (MPa) | 485-620 |
| Yield strength (ksi) | 38 |
| Yield strength (MPa) | 260 |
| Elongation in 200mm (min)(%) | 17 |
| Elongation in 50mm (min) (%) | 21 |
| Thickness (max)(mm) | 205 |
(Minimum values unless stated otherwise)
(Please note: the technical information above is for guidance only
– for exact specifications please check with our Sales Team)
Table 1: Chemical Composition of ASTM A516 Grade 70
| Carbon (C) | % |
| 12.5mm or less 12.5 - 50mm 50 - 100mm 100 - 200mm > 200mm | 0.27 0.28 0.30 0.31 0.31 |
Manganese (Mn) | % |
| 12.5mm or less • Heat Analysis : • Product Analysis : Over 12.5mm • Heat Analysis : • Product Analysis : | 0.85-1.20 0.79-1.30 0.85-1.20 0.79-1.30 |
Phosphorus (P) | % |
| (max) | 0.035 |
Sulphur (S) | % |
| (max) | 0.035 |
Silicon (Si) | % |
| • Heat Analysis : • Product Analysis : | 0.15-0.40 0.13-0.45 |
PLATE FOR PRESSURE VESSEL
1.Intermediated Temperature: SA/A515 Gr.50, Gr.60, Gr.65, Gr.70
A204 Gr.A, Gr.B
A285 Gr.A, Gr.B
2.High Temperature: SA/A387 Gr.11 CL1, CL2
SA/A387 Gr.12 CL1, CL2
3.Low Temperature: SA/A516 Gr.55, Gr.60, Gr.65, Gr.70
A537 Gr.1, Gr.2
4.Extreme Low Temperature: 9% Nickel
Stainless Steel: SUS304, SUS 316 etc.
Duplex
Titanium
Cladding
