Yuhong Group Co.,Ltd |
Verified Suppliers
|
|
Corrugated Tube ASTM A312 310S Electric power Petrochemical Chemical heat supply
Overview
Corrugated tube as a flexible pressure-resistant pipe fittings
installed in the liquid conveying system, to compensate for the
mutual displacement of pipelines or machines, equipment joints, to
absorb vibration energy, can play a role in vibration damping,
sound dampening, etc., with good flexibility, light quality,
corrosion resistance, fatigue resistance, high and low temperature
resistance and many other characteristics.
Metal bellows stiffness so that the metal bellows or other elastic
components to produce a unit of displacement required load value is
called the component stiffness, generally expressed in "K". If the
elastic properties of the component is non-linear, the stiffness is
no longer a constant, but changes with the increase in load.
Nominal stiffness elastic element design calculation is given when
the stiffness is called nominal (or rated) stiffness. It has an
error with the measured stiffness of the component, especially the
elastic element with non-linear elastic properties. Nominal
stiffness represents the stiffness of which point on the curve, it
is necessary to consider carefully. In general, it is better not to
use the design calculation value directly for the nominal
stiffness, but should use the corrected value of the product
prototype after the test. Stiffness tolerance for a batch of
elastic components tested stiffness allowed dispersion range. For
the same batch of flexible components, stainless steel metal hose
stiffness of each component are not the same, there is a range of
dispersion. In order to ensure the performance of the components,
it is necessary to have a limit on the dispersion of stiffness.
Elastic sensitive components, the stiffness tolerance requirements
are limited to the nominal value of + / - 5%; general engineering
bellows type elastic components, stiffness tolerance can be limited
to + / - 50%.
310S Chemical Composition
SS | 310 | 310S |
Ni | 19 – 22 | 19 – 22 |
Fe | Balance | Balance |
Cr | 24 – 26 | 24 – 26 |
C | 0.25 max | 0.08 max |
Si | 1.50 max | 1.50 max |
Mn | 2 max | 2 max |
P | 0.045 max | 0.045 max |
S | 0.030 max | 0.03 max |
310S Mechanical Property
Grade | 310 | 310S |
Tensile Strength (MPa) min | 515 | 515 |
Yield Strength 0.2% Proof (MPa) min | 205 | 205 |
Elongation (% in 50mm) min | 40 | 40 |
Hardness | ||
Rockwell B (HR B) max | 92 | 92 |
Brinell (HB) max | 201 | 201 |
Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (m/m/0C) | Thermal Conductivity (W/m.K) | Specific Heat 0-1000C (J/kg.K) | Electrical Resistivity (n.m) | |||
0-1000C | 0-3150C | 0-5380C | at 1000C | at 5000C | |||||
310 / 310S | 7750 | 200 | 15.9 | 16.2 | 17 | 14.2 | 18.7 | 500 | 720 |
ASTM A312 TP 310S Stainless Steel Tube Application
Electric power
Petrochemical
Chemical
Condenser Tube