|
[China]
Trade Verify
Address: 20TH FLOOR,NO.1 NEW WORLD BUILDING ,NO.1018 MINAN ROAD,YINZHOU DISTRICT, NINGBO CITY, ZHEJIANG PROVINCE, CHINA
Contact name:Jikin Cai
Yuhong Group Co.,Ltd |
|
Verified Suppliers
|
|
|
DIN 2.4642 Alloy Seamless Tube Inconel 690™ ASME SB163 / SB167 / SB829
Super alloys have good creep and oxidation resistance. They are also known as high performance alloys, and can be formed in different shapes. Work hardening, precipitation hardening, and solid-solution hardening are performed for strengthening the super alloys. These alloys have the capcity to function at very high temperatures and severe mechanical stress, and also where high surface stability is required.
Inconel 690™ is a nickel-chromium alloy. It has high resistance to hot gases or oxidizing chemicals due to the presence of high chromium content. The following datasheet gives an overview of Inconel 690™.
The chemical composition of Inconel 690™ is outlined in the following table.
| Element | Content (%) |
|---|---|
| Chromium, Cr | 27-31 |
| Iron, Fe | 7-11 |
| Silicon, Si | 0.5 max |
| Manganese, Mn | 0.5 max |
| Copper, Cu | 0.5 max |
| Silicon, Si | 0.5 max |
| Carbon, C | 0.05 max |
| Sulfur, S | 0.015 max |
| Nickel, Ni | Remainder |
The physical properties of Inconel 690 ™ are given in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.19 g/cm³ | 0.296 lb/in³ |
| Melting point | 1343-1377°C | 2450-2510°F |
The mechanical properties of Inconel 690™ are displayed in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Poisson's ratio | 0.29 | 0.29 |
| Hardness | 85 | 85 |
The following table shows the thermal properties of Inconel 690™.
| Properties | Metric | Imperial |
|---|---|---|
| Thermal conductivity | 12.1 W/mK | 84 BTU in/hr.ft².°F |
Other designations that are equivalent to Inconel 690™ include:
Inconel 690™ can be machined using conventional machining methods which are used for iron-based alloys. Machining operations are performed using commercial coolants. High-speed operations such as grinding, milling or turning, are performed using water-base coolants.
Inconel 690™ can be formed using all conventional techniques.
Inconel 690™ is welded using gas-tungsten arc welding, shielded metal-arc welding, gas metal-arc welding, and submerged-arc welding methods.
Inconel 690™ does not react to heat treatment.
Inconel 690™ is forged at 1038 to 1233°C (1900 to 2250°F).
Inconel 690™ is hot worked at 872 to 1205°C (1600 to 2200°F).
Inconel 690™ is cold worked using standard tooling.
Inconel 690™ is annealed at 1038°C (1900°F) followed by cooling.
Inconel 690™ does not react to aging thermal treatment.
Inconel 690™ is hardened by cold working.
Inconel 690™ is used in the following applications:
