|
[China]
Trade Verify
Address: NO.18-1, Funan road,Wenlin, Zhutang Town, Jiangyin city, Jiangsu province, China.
Contact name:Spring Wu
Sussman Machinery(Wuxi) Co.,Ltd |
|
Verified Suppliers
|
|
|
C Shaped Lipped Channel Strut Channel Roll Forming Machine 1.2 - 2.6mm With 22KW Motor
1. C Channel Machine Technical Parameter
| Machine Specifications | |
|---|---|
| Weight | About 10000kgs |
| Size | About 20m x 1.0m x 1.0m (length x width x height) |
| Color | Main color: blue |
| Warning color: yellow | |
| Suitable Raw Material | |
| Material | Galvanized steel |
| Thickness | 1.2-2.6mm |
| Yield Strength | 350-500Mpa |
| Main Technical Parameters | |
| Quantity of forming rollers stations | 26 |
| Diameter of forming rollers shafts | 75mm |
| Working Speed | 8-12m/min |
| Forming rollers material | Gr15 mould steel, with quenched treatment |
| Cutter material | CR12 mould steel, with quenched treatment |
| Controlling system | PLC and Converter |
| Electric Power requirement | Main motor power: about 22 kw |
| Hydraulic station | Motor 5.5kw |
2. C Channel Machine Components
C strut roll forming machine can produce several shape products as profile.
The different size of channel is adjusted by the spacers between up and downside rollers. Because the design of these spacers is half circle, then two joint together, so when adjusting, needn't remove the rollers, it is very easy and convenient.
when change different specification, need to change the cutting mould.
| S.N | Equipment name | Quantity |
| 1 | 5T hydraulic un-coiler | 1 set |
| 2 | Feeding guide | 1 set |
| 3 | Weld machine with cutting | 1 set |
| 4 | Main roll forming machine | 1 unit |
| 6 | Servo following cutting | 1 set |
| 7 | control box | 1 set |
| 8 | Out tables | 2 units |
3. C Strut Channel Application
1.These include pipes, electrical and data wire, mechanical systems such as ventilation, air conditioning, and other mechanical systems.
2.Solar frame panel is used to mount, brace, support, and connect lightweight structural loads in building construction.
Machine maintenance
Daily maintenance with meticulous care plays an important part in
extension the equipments’ operation time and the quality of rolling
plank. Therefore, please do the following things in your daily.
1.The hydraulic tank must be filled with 32# or 46# hydraulic oil
before using. The amount of oil is subject to the oil mark
2. Add and daub lube often to the outside parts. (Such as driving
chain,Scissors, gears, rollers, )
3. Wipe the surface dust of roller often and particularly work
outside. If you do not use it for long time ,you should daub
machine and lube in the roller surface and you need clean it when
you use next time.
4. If the equipment does not use for long time, you should use
plastics cloth or other articles to cover it and notice to avoid
rain and damp, especially electrical controlling box
5. Cutting device should add lube to the places where need lube to
the request
6. Usually look into hydraulic station and the oil quantity of
deceleration machine, you should add in time when oil quantity
shortage
7. Electrical components should be guaranteed to work in a dry
environment, such as damp. Rain should continue to work after
Drying.
