|
[China]
Trade Verify
Address: No.143 Qingyang North road,Tianning district. Changzhou
Contact name:Lisa
Changzhou Joyruns Steel Tube CO.,LTD |
|
Verified Suppliers
|
|
|
DIN2393 ST34.2 Welded Precision Steel Tube for Gas Spring
DIN 2393 Standard applies to welded precision steel tubes; and in
compliance with ISO/DIS 3304.DIN 2393 Precision Welded Steel Tubes
is mainly applied for Auto and motorcycle shock absorbers, Gas
springs, Hydraulic system steel tubes, Electric industry,
Construction machinery, Heat exchanger and Condenser.
Precision steel tubes
1. Automotive fields
A. Fuel injection lines/nozzles
B. CNG (Compressed Nature Gas) tube-- Burst pressure: 1307Bar,
Working Pressure: around 350bar
C. Drive transmission: Steering column elements
D. Gear shafts, hand brake, front axles, airbag inflators,
stabilizers, seat fasteners, front-wheel driveshafts
2. Hydraulic Fields
A. Hydraulic circuits (HPL), pneumatic lines, and hydraulic
suspension
B. Hydraulic cylinders (HPZ)
Delivery Condition:
| Delivery Condition | Specification |
| BK ( +C ) | Tubes don't undergo heat treatment following the final cold forming,thus have a rather hig-h resistance to deformation |
| BKW ( +LC ) | The final heat treatment is follwed by cold drawing involving limted deformation. Appopriat-e further processing allows a certain degree of cold droming( eg: handing expanding) |
| BKS ( +SR ) | Heat treatment is applied following the last cold forming process, subject to appropriate procession conditions, the increate in the residual stresses,involved enables both forming and maching to a certain degress. |
| GBK ( +A ) | The last cold forming process followed by annealing in controlled atmosphere. |
| NBK (+N ) | The last cold forming process is followed by annealing above the upper transformation poi-nt in a controlled atmosphere. |
DIN2393 ST34.2 Specifications:
Grade and Chemical Composition ( ％ )
| Chemical Composition (%, max) | |||||
Steel Grade | C | Si | Mn | S | P |
RSt 34-2 | 0,15 | 0,30 | 0,60 | 0,025 | 0,025 |
RSt 37-2 | 0,17 | 0,30 | 0,70 | 0,025 | 0,025 |
St 44-2 | 0,21 | 0,30 | 1,10 | 0,025 | 0,025 |
Mechanical properties
Steel Grade | Tensile Strength, N/mm2 (min) | Предел текучести, N/mm2 (min) | Elongation, % (min) |
NBK - normalized | |||
RSt 34-2 | 340 - 470 | 235 | 25 |
RSt 37-2 | 440 - 570 | 255 | 21 |
St 44-2 | 560 - 630 | 355 | 22 |
BK - without heat treatment | |||
RSt 34-2 | 480 | - | 6 |
RSt 37-2 | 580 | - | 5 |
St 44-2 | 640 | - | 4 |
GBK - annealed | |||
RSt 34-2 | 315 | - | 28 |
RSt 37-2 | 390 | - | 25 |
St 44-2 | 490 | - | 21 |
