Home Companies Changzhou Joyruns Steel Tube CO.,LTD

EN10139 DC04 Double Wall Steel Tube 7.94MM*0.9MM Zinc Galvanised Steel Pipe Coil

Changzhou Joyruns Steel Tube CO.,LTD

Contact Us

[China] country

Trade Verify

Address: No.143 Qingyang North road,Tianning district. Changzhou

Contact name:Lisa

Inquir Now

Changzhou Joyruns Steel Tube CO.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

EN10139 DC04 Double Wall Steel Tube 7.94MM*0.9MM Zinc Galvanised Steel Pipe Coil

Country/Region china
City & Province changzhou
Categories Metal Casting Machinery
InquireNow

Product Details

EN10139 DC04 7.94MM*0.9MM Double-wall zinc-coated Seamless steel tubing in coil

 

We supply steel tubes of many sizes with fine accuracies, made from low carbon steel strips.

Zinc galvanized double-wall steel tube has better corrosion protection than non-galvanized double-wall steel tube which is copper brazed

 

Bundy tube, sometimes called Bundy pipe, is the type of double-walled low-carbon steel tube manufactured by rolling a copper-coated steel strip through 720 degrees and resistance brazing the overlapped seam in a process called Bundywelding.

 

We offer single wall electro-welded steel tube, also known as single wall Bundy tube. Mostly it's coated with copper for automotive use. Also, it can be plated with zinc for automotive and condenser use, or coated with PVF for automotive use, as an economic alternative for double-wall welded steel tube.

 

Chemical Composition

Chemical Composition

C

Si

Mn

P

S

0.08%

0.03%

0.03%

0.02%

0.02%

 

Mechanical Properties

Tensile Strength

290Mpa

Yield Strength

180Mpa

Elongation

20%

Salt spray test

48hours

Inside Surface Cleanliness

20g/m2

 

SINGLE WALL STEEL TUBING OD & WT TOLERANCE

 

All the tube diameters can be available plain, zinc-coated or copper coated.

 

PLAIN TUBE

Plain tube is supplied with its outside surface slightly oiled to improve the resistance to oxidation. Tube shall be kept in dry storages, away from air drafts, humidity or any other corrosive agents

 

ELECTROLYTIC BOTH SIDE COPPER COATING

The steel strip from which the tube is made shall be copper coated on both sides with a copper layer ≥2µm. The area along the welding seam, on the outside surface is not coated because of the scarfing operation to remove the excessive bead.

 

HOT DIP ZINC COATING

Tube outside surface can be coated with a layer of zinc whose weight is ≥ 70 grams per square meter determined by UNI EN ISO 1460/97. This coating the tube withstands to > 72 h in salt spray fog test before showing red rust (according to UNI ISO 9227).

 

WORKING SHOP

  

 

Laboratory Testing Equipment

  

 

  

 

PACKING

    

 


 

Hot Products

ASTM A179 / ASME SA179 32*3mm Seamless Cold Drawn Low Carbon Heat Exchanger/Condenser Tube Seamless ...
Cold drawing seamless alloy Boiler Heat Exchanger ASTM A335 It is used for boiler and boiler flue ...
ASTM A333 Heat Exchanger Tube welded steel pipe , heat exchanger pipe Description: ASTM A333 ...
JIS 3461 STB35 Carbon steel pipe for boilers and heat exchangers JIS G3461 STB 35 used for exchanger ...
JIS G3462 STHA22 Alloy steel boiler and heat exchanger tubes We also offer steel fabrication service ...
JIS G3462 STBA23 Alloy steel boiler and heat exchanger tubes Higher temperature resistance or ...