|
[China]
Trade Verify
Address: No.1 Yinhe road, Wanshi town, Yixing, Jiangsu,China
Contact name:Delia Wang
Jiangsu milky way steel poles co.,ltd |
|
Verified Suppliers
|
|
|
12M 600daN Steel Utility Pole Gr65 Material for 55KV Power Distribution
Description:
Our Transmission Pole is designed for the high voltage power
transmission and low voltage power transmission.
Designed and manufacutred for durability, corrosion
resistance and visual appeal.
Specifications:
Material | Usually Q345B/A572 |
Torlance of the dimension | +- 2% |
Power | 10 KV ~550 KV |
| |
Marks | Name plate through rivert or glue ,engrave ,emboss as per customer requirement |
Surface treatment | Hot dip galvanized Following ASTM A 123, |
Joint of Poles | Insert mode,inner flange mode,face to face joint mode |
Design of pole | Against earthquake of 8 grade |
Wind Speed | 33 m /s |
Minimum yield strength | 355 mpa |
Minimum ultimate tensile strength | 490 mpa |
Max ultimate tensile strength | 620 mpa |
Standard | ISO 9001 |
Length of per section | Within 14m once forming without slip joint |
The information to inquiry or purchase
-Steel pole height and force
-Cross arm type and length,the position to install in the
steel pole
-The method to fix the cross arm(use bolt to connect or use
one or two template to weld in the steel pole to install the
cross arm)
-Safety factor of the steel pole
-Wind speed
-Type of climbing rung
-Destination port
-Other.
Technical information-Cross Arm
The above listed is the most frequently used design,and is made from angel steel.And the cross arm will be fixed to the pole shaft connecting by bolts through the pre-drilling holes on both the cross arms and the pole shaft.If you have any other requirements on the design,material and connecting method for cross arm,pls contact us.
